我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone USB duplicator unit with LCD screen and 47 slots

Systor

Systor SYS-USB30-47 1 to 47 USB 3.0/3.1 Duplicator

SKU CH-QK9S-QBZ15

Standalone duplicator copies up to 47 USB 1.1, 2.0, 3.0 or 3.1 drives simultaneously at 300 MB/s with 256 MB buffer and LCD control

  • TypeUSB Flash Drive Duplicator
  • Target1 to 47
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 47

顯示另外 7 款選項

被劃上刪除線的選項確實存在，但本站並無供貨。

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copies up to 47 USB drives simultaneously
  • 18 GB per minute duplication speed
  • Standalone operation with no PC required
  • Supports USB 1.1 through USB 3.1 standards
  • LCD screen with four-key control interface

Systor SYS-USB30-47 Duplicator

The Systor SYS-USB30-47 is a standalone USB flash drive duplicator and sanitizer that copies one source to up to 47 targets simultaneously. It operates without a host computer and supports USB 1.1, 2.0, 3.0 and 3.1 media through slot-loading ports. An LCD screen and four-button panel provide status and control in English or Japanese.

High-volume duplication and erasure

This unit suits organisations that need to duplicate or securely erase large batches of USB drives on site, such as IT deployments, media distribution or data sanitisation workflows. Buyers who only copy a few drives at a time, or who require software-driven imaging from a PC, will find the 47-target capacity and standalone design excessive for their needs.

47-target simultaneous copy

The defining specification is the ability to write to 47 target drives at once from a single source, with asynchronous operation allowing each channel to load, copy and unload independently. This throughput determines whether the duplicator matches the scale of the intended workload.

商品特色

  • Copies up to 47 USB drives simultaneously
  • 18 GB per minute duplication speed
  • Standalone operation with no PC required
  • Supports USB 1.1 through USB 3.1 standards
  • LCD screen with four-key control interface

商品規格

BrandSystor
ModelSYS-USB30-47
TypeUSB Flash Drive Duplicator
Target1 to 47
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the SYS-USB30-47 duplicator and what step is often missed?

Connect the power supply to either 115V or 230V, insert the source USB drive into the source slot and target drives into the 47 target slots, then use the 4-key LCD control to select copy mode; the step often missed is confirming the correct file-system setting (FAT16/32, NTFS, or Linux EXT2/3/4) for Quick Copy before starting.

What maintenance or replacement will the duplicator need later?

The unit has no user-serviceable parts; keep the LCD screen and slots free of dust, operate within 15%–90% humidity, and verify the power supply remains stable at 115V or 230V; any internal repair requires factory service.

What limit appears first during sustained high-speed copying?

The 300MB/s data transfer rate and 256MB buffer memory set the throughput ceiling; sustained runs at up to 18GB/min will hit this bandwidth limit before thermal or duty-cycle constraints.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。