Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black standalone USB duplicator unit with LCD screen and 47 slots

Systor

Systor SYS-USB30-47 1 to 47 USB 3.0/3.1 Duplicator

SKU CH-QK9S-QBZ15

Standalone duplicator copies up to 47 USB 1.1, 2.0, 3.0 or 3.1 drives simultaneously at 300 MB/s with 256 MB buffer and LCD control

  • TypeUSB Flash Drive Duplicator
  • Target1 to 47
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 47

7 yapılandırma daha gösterin

Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copies up to 47 USB drives simultaneously
  • 18 GB per minute duplication speed
  • Standalone operation with no PC required
  • Supports USB 1.1 through USB 3.1 standards
  • LCD screen with four-key control interface

Systor SYS-USB30-47 Duplicator

The Systor SYS-USB30-47 is a standalone USB flash drive duplicator and sanitizer that copies one source to up to 47 targets simultaneously. It operates without a host computer and supports USB 1.1, 2.0, 3.0 and 3.1 media through slot-loading ports. An LCD screen and four-button panel provide status and control in English or Japanese.

High-volume duplication and erasure

This unit suits organisations that need to duplicate or securely erase large batches of USB drives on site, such as IT deployments, media distribution or data sanitisation workflows. Buyers who only copy a few drives at a time, or who require software-driven imaging from a PC, will find the 47-target capacity and standalone design excessive for their needs.

47-target simultaneous copy

The defining specification is the ability to write to 47 target drives at once from a single source, with asynchronous operation allowing each channel to load, copy and unload independently. This throughput determines whether the duplicator matches the scale of the intended workload.

Öne çıkanlar

  • Copies up to 47 USB drives simultaneously
  • 18 GB per minute duplication speed
  • Standalone operation with no PC required
  • Supports USB 1.1 through USB 3.1 standards
  • LCD screen with four-key control interface

Teknik özellikler

BrandSystor
ModelSYS-USB30-47
TypeUSB Flash Drive Duplicator
Target1 to 47
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How do I install the SYS-USB30-47 duplicator and what step is often missed?

Connect the power supply to either 115V or 230V, insert the source USB drive into the source slot and target drives into the 47 target slots, then use the 4-key LCD control to select copy mode; the step often missed is confirming the correct file-system setting (FAT16/32, NTFS, or Linux EXT2/3/4) for Quick Copy before starting.

What maintenance or replacement will the duplicator need later?

The unit has no user-serviceable parts; keep the LCD screen and slots free of dust, operate within 15%–90% humidity, and verify the power supply remains stable at 115V or 230V; any internal repair requires factory service.

What limit appears first during sustained high-speed copying?

The 300MB/s data transfer rate and 256MB buffer memory set the throughput ceiling; sustained runs at up to 18GB/min will hit this bandwidth limit before thermal or duty-cycle constraints.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.