Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black standalone USB duplicator unit with LCD screen and 47 slots

Systor

Systor SYS-USB30-47 1 to 47 USB 3.0/3.1 Duplicator

SKU CH-QK9S-QBZ15

Standalone duplicator copies up to 47 USB 1.1, 2.0, 3.0 or 3.1 drives simultaneously at 300 MB/s with 256 MB buffer and LCD control

  • TypeUSB Flash Drive Duplicator
  • Target1 to 47
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 47

Skatīt vēl 7 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copies up to 47 USB drives simultaneously
  • 18 GB per minute duplication speed
  • Standalone operation with no PC required
  • Supports USB 1.1 through USB 3.1 standards
  • LCD screen with four-key control interface

Systor SYS-USB30-47 Duplicator

The Systor SYS-USB30-47 is a standalone USB flash drive duplicator and sanitizer that copies one source to up to 47 targets simultaneously. It operates without a host computer and supports USB 1.1, 2.0, 3.0 and 3.1 media through slot-loading ports. An LCD screen and four-button panel provide status and control in English or Japanese.

High-volume duplication and erasure

This unit suits organisations that need to duplicate or securely erase large batches of USB drives on site, such as IT deployments, media distribution or data sanitisation workflows. Buyers who only copy a few drives at a time, or who require software-driven imaging from a PC, will find the 47-target capacity and standalone design excessive for their needs.

47-target simultaneous copy

The defining specification is the ability to write to 47 target drives at once from a single source, with asynchronous operation allowing each channel to load, copy and unload independently. This throughput determines whether the duplicator matches the scale of the intended workload.

Priekšrocības

  • Copies up to 47 USB drives simultaneously
  • 18 GB per minute duplication speed
  • Standalone operation with no PC required
  • Supports USB 1.1 through USB 3.1 standards
  • LCD screen with four-key control interface

Specifikācijas

BrandSystor
ModelSYS-USB30-47
TypeUSB Flash Drive Duplicator
Target1 to 47
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the SYS-USB30-47 duplicator and what step is often missed?

Connect the power supply to either 115V or 230V, insert the source USB drive into the source slot and target drives into the 47 target slots, then use the 4-key LCD control to select copy mode; the step often missed is confirming the correct file-system setting (FAT16/32, NTFS, or Linux EXT2/3/4) for Quick Copy before starting.

What maintenance or replacement will the duplicator need later?

The unit has no user-serviceable parts; keep the LCD screen and slots free of dust, operate within 15%–90% humidity, and verify the power supply remains stable at 115V or 230V; any internal repair requires factory service.

What limit appears first during sustained high-speed copying?

The 300MB/s data transfer rate and 256MB buffer memory set the throughput ceiling; sustained runs at up to 18GB/min will hit this bandwidth limit before thermal or duty-cycle constraints.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.