Systor SYSUSB30100-63 1 to 63 USB 3.0/3.1 Duplicator
- USB Flash Drive Dup…
- 1 to 63
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Systor
Standalone USB duplicator copies one source to 23 targets at up to 300 MB/s with bit-by-bit verification
Target Size 1 to 23
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
The Systor SYS-USB30-23 is a standalone USB 3.1 duplicator that copies one source drive to up to twenty-three targets without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a maximum transfer rate of 300 MB/s with 256 MB of buffer memory. An LCD screen and four-button control panel manage synchronous or asynchronous copy modes.
Organisations that regularly duplicate bootable drives, firmware images or data sets across many USB sticks will benefit from the asynchronous operation that lets each channel load, unload and copy independently. The unit handles FAT16, FAT32, NTFS and Linux EXT2/3/4 formats in quick-copy mode and falls back to whole-media bit-by-bit copying for other formats. Buyers who require duplication of interfaces other than USB, or who need more than twenty-three simultaneous targets, should consider a different platform.
The defining specification is the twenty-three independent copy channels that operate asynchronously, allowing continuous throughput up to 18 GB/min without waiting for the slowest target to finish. This channel count and the asynchronous architecture together determine whether the duplicator matches the required cloning volume.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-23 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 23 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The duplicator offers 23 target slots so you can copy one source drive to 23 destinations at once.
It copies at up to 300 MB/s (18 GB/min) and runs from a standard 115 V or 230 V supply without a built-in fan.
No — it is a standalone unit with a 4-key LCD panel, so it works without a computer or extra software.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?