Systor SYSUSB30100-63 1 to 63 USB 3.0/3.1 Duplicator
- USB Flash Drive Dup…
- 1 to 63
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Standalone USB duplicator copies one source to 23 targets at up to 300 MB/s with bit-by-bit verification
Target Size 1 to 23
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
The Systor SYS-USB30-23 is a standalone USB 3.1 duplicator that copies one source drive to up to twenty-three targets without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a maximum transfer rate of 300 MB/s with 256 MB of buffer memory. An LCD screen and four-button control panel manage synchronous or asynchronous copy modes.
Organisations that regularly duplicate bootable drives, firmware images or data sets across many USB sticks will benefit from the asynchronous operation that lets each channel load, unload and copy independently. The unit handles FAT16, FAT32, NTFS and Linux EXT2/3/4 formats in quick-copy mode and falls back to whole-media bit-by-bit copying for other formats. Buyers who require duplication of interfaces other than USB, or who need more than twenty-three simultaneous targets, should consider a different platform.
The defining specification is the twenty-three independent copy channels that operate asynchronously, allowing continuous throughput up to 18 GB/min without waiting for the slowest target to finish. This channel count and the asynchronous architecture together determine whether the duplicator matches the required cloning volume.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-23 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 23 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The duplicator offers 23 target slots so you can copy one source drive to 23 destinations at once.
It copies at up to 300 MB/s (18 GB/min) and runs from a standard 115 V or 230 V supply without a built-in fan.
No — it is a standalone unit with a 4-key LCD panel, so it works without a computer or extra software.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?