Systor SYSUSB30100-47 1 to 47 USB Duplicator
- USB Flash Drive Dup…
- 1 to 47
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Standalone duplicator copies up to 63 USB 1.1, 2.0, 3.0 or 3.1 flash drives at 100 MB/sec with bit-for-bit verification and DoD-compliant erase
Target Size 1 to 63
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]
The Systor SYSUSB30100-63 copies one source USB drive to up to 63 targets without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and operates through a four-key LCD interface. Asynchronous mode lets each channel load, unload and copy independently. The unit runs on 115V or 230V power.
Maximum transfer rate reaches 100MB per second across the array. Quick Copy handles FAT16, FAT32, NTFS and Linux EXT2/EXT3/EXT4 file systems while Whole Media mode duplicates every sector regardless of format. Synchronous mode waits for all targets; asynchronous mode releases each port as it finishes. Buffer memory is 256M.
The black panel presents real-time progress and diagnostics on the built-in LCD. Slot loading avoids cable clutter for 63 simultaneous drives. Three format options — Auto, FAT and FAT32 — prepare media before duplication. A hardware bit-for-bit compare verifies every copy and a full erase function meets DoD sanitisation standards. Operating humidity range is 15% to 90%.
| Brand | Systor |
|---|---|
| Model | SYSUSB30100-63 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 63 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 100MB/sec |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The duplicator supports up to 63 target drives simultaneously from a single source, allowing high-volume batch duplication without a host computer.
The hardware can sustain up to 100 MB per second, which translates to roughly 6 GB per minute, so a 32 GB drive finishes in about five minutes under ideal conditions.
The unit accepts USB 1.1, 2.0, 3.0 and 3.1 drives; the internal controller caps duplication at 100 MB/sec regardless of the drive's own maximum specification.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?