We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black standalone USB duplicator with LCD screen and 63 slots

Systor

Systor SYSUSB30100-63 1 to 63 USB 3.0/3.1 Duplicator

SKU CH-CNCH-9NKP2

Standalone duplicator copies up to 63 USB 1.1, 2.0, 3.0 or 3.1 flash drives at 100 MB/sec with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 63
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 63

Show 7 more configurations

Struck-through versions exist but are not stocked here.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Copies up to 63 USB drives simultaneously
  • Standalone operation with no computer required
  • Transfer speeds up to 100MB per second
  • Bit-by-bit compare verifies every copy
  • LCD screen with four-key control

Standalone USB duplicator for high-volume workflows

The Systor SYSUSB30100-63 copies one source USB drive to up to 63 targets without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and operates through a four-key LCD interface. Asynchronous mode lets each channel load, unload and copy independently. The unit runs on 115V or 230V power.

Interface and copy-mode limits

Maximum transfer rate reaches 100MB per second across the array. Quick Copy handles FAT16, FAT32, NTFS and Linux EXT2/EXT3/EXT4 file systems while Whole Media mode duplicates every sector regardless of format. Synchronous mode waits for all targets; asynchronous mode releases each port as it finishes. Buffer memory is 256M.

Slot-load chassis with LCD status

The black panel presents real-time progress and diagnostics on the built-in LCD. Slot loading avoids cable clutter for 63 simultaneous drives. Three format options — Auto, FAT and FAT32 — prepare media before duplication. A hardware bit-for-bit compare verifies every copy and a full erase function meets DoD sanitisation standards. Operating humidity range is 15% to 90%.

Highlights

  • Copies up to 63 USB drives simultaneously
  • Standalone operation with no computer required
  • Transfer speeds up to 100MB per second
  • Bit-by-bit compare verifies every copy
  • LCD screen with four-key control

Specifications

BrandSystor
ModelSYSUSB30100-63
TypeUSB Flash Drive Duplicator
Target1 to 63
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How many USB drives can I copy at once with the 1 to 63 target configuration?

The duplicator supports up to 63 target drives simultaneously from a single source, allowing high-volume batch duplication without a host computer.

What does the 100 MB/sec transfer rate mean for actual copy time?

The hardware can sustain up to 100 MB per second, which translates to roughly 6 GB per minute, so a 32 GB drive finishes in about five minutes under ideal conditions.

Which USB standards are supported and what speed ceiling do they impose?

The unit accepts USB 1.1, 2.0, 3.0 and 3.1 drives; the internal controller caps duplication at 100 MB/sec regardless of the drive's own maximum specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.