暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with LCD screen and 63 slots

Systor

Systor SYSUSB30100-63 1 to 63 USB 3.0/3.1 Duplicator

SKU CH-CNCH-9NKP2

Standalone duplicator copies up to 63 USB 1.1, 2.0, 3.0 or 3.1 flash drives at 100 MB/sec with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 63
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 63

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Copies up to 63 USB drives simultaneously
  • Standalone operation with no computer required
  • Transfer speeds up to 100MB per second
  • Bit-by-bit compare verifies every copy
  • LCD screen with four-key control

Standalone USB duplicator for high-volume workflows

The Systor SYSUSB30100-63 copies one source USB drive to up to 63 targets without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and operates through a four-key LCD interface. Asynchronous mode lets each channel load, unload and copy independently. The unit runs on 115V or 230V power.

Interface and copy-mode limits

Maximum transfer rate reaches 100MB per second across the array. Quick Copy handles FAT16, FAT32, NTFS and Linux EXT2/EXT3/EXT4 file systems while Whole Media mode duplicates every sector regardless of format. Synchronous mode waits for all targets; asynchronous mode releases each port as it finishes. Buffer memory is 256M.

Slot-load chassis with LCD status

The black panel presents real-time progress and diagnostics on the built-in LCD. Slot loading avoids cable clutter for 63 simultaneous drives. Three format options — Auto, FAT and FAT32 — prepare media before duplication. A hardware bit-for-bit compare verifies every copy and a full erase function meets DoD sanitisation standards. Operating humidity range is 15% to 90%.

特長

  • Copies up to 63 USB drives simultaneously
  • Standalone operation with no computer required
  • Transfer speeds up to 100MB per second
  • Bit-by-bit compare verifies every copy
  • LCD screen with four-key control

仕様

BrandSystor
ModelSYSUSB30100-63
TypeUSB Flash Drive Duplicator
Target1 to 63
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How many USB drives can I copy at once with the 1 to 63 target configuration?

The duplicator supports up to 63 target drives simultaneously from a single source, allowing high-volume batch duplication without a host computer.

What does the 100 MB/sec transfer rate mean for actual copy time?

The hardware can sustain up to 100 MB per second, which translates to roughly 6 GB per minute, so a 32 GB drive finishes in about five minutes under ideal conditions.

Which USB standards are supported and what speed ceiling do they impose?

The unit accepts USB 1.1, 2.0, 3.0 and 3.1 drives; the internal controller caps duplication at 100 MB/sec regardless of the drive's own maximum specification.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。