暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with LCD screen and 15 target slots

Systor

Systor SYSUSB30100-15 USB 3.0/3.1 Duplicator 1 to 15

SKU CH-813Q-TB6KY

Standalone duplicator copies one USB flash drive to fifteen targets at up to 100 MB/s with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 15
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 15

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation — no computer or software required
  • Copies up to 15 USB drives simultaneously
  • Transfer speeds up to 100 MB per second
  • Asynchronous mode lets each channel load and copy independently
  • LCD screen with four-key control shows real-time status

1-to-15 USB 3.0/3.1 Duplicator

This standalone duplicator copies up to fifteen USB flash drives simultaneously without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media with a 256 MB buffer and an LCD control panel. The unit operates on 115 V or 230 V power and includes quick-erase functions that meet DoD standards.

Target users and alternatives

It suits IT departments, duplication services or forensic teams that need high-volume, bit-for-bit cloning of USB storage in FAT16, FAT32, NTFS or Linux file systems. Buyers who require duplication of internal drives, memory cards or optical media should consider a different device type.

Deciding specification: fifteen target ports

The single figure that determines fit is the fifteen target slots, allowing one source drive to be copied to fifteen destinations at once. If your workflow never exceeds a lower target count, a smaller duplicator will cost less and occupy less bench space.

特長

  • Standalone operation — no computer or software required
  • Copies up to 15 USB drives simultaneously
  • Transfer speeds up to 100 MB per second
  • Asynchronous mode lets each channel load and copy independently
  • LCD screen with four-key control shows real-time status

仕様

BrandSystor
ModelSYSUSB30100-15
TypeUSB Flash Drive Duplicator
Target1 to 15
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What USB standards does the SYSUSB30100-15 duplicator support and what is the maximum data transfer rate?

The duplicator supports USB 1.1, USB 2.0, USB 3.0 and USB 3.1 with a maximum data transfer rate of 100MB/sec.

How many target ports does the duplicator provide and what load type is used?

The unit provides 15 target ports and uses a slot load type for inserting USB flash drives.

Does the duplicator require a computer for operation and what copy modes are available?

The duplicator operates as a standalone unit with no computer required and offers both synchronous and asynchronous copy modes.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。