Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Systor

Systor SYSUSB30100-15 USB 3.0/3.1 Duplicator 1 to 15

SKU CH-813Q-TB6KY

Standalone duplicator copies one USB flash drive to fifteen targets at up to 100 MB/s with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 15
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 15

Προβολή 7 ακόμη διαμορφώσεων

Οι διαγραμμένες εκδόσεις υπάρχουν, αλλά δεν είναι διαθέσιμες εδώ.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation — no computer or software required
  • Copies up to 15 USB drives simultaneously
  • Transfer speeds up to 100 MB per second
  • Asynchronous mode lets each channel load and copy independently
  • LCD screen with four-key control shows real-time status

1-to-15 USB 3.0/3.1 Duplicator

This standalone duplicator copies up to fifteen USB flash drives simultaneously without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media with a 256 MB buffer and an LCD control panel. The unit operates on 115 V or 230 V power and includes quick-erase functions that meet DoD standards.

Target users and alternatives

It suits IT departments, duplication services or forensic teams that need high-volume, bit-for-bit cloning of USB storage in FAT16, FAT32, NTFS or Linux file systems. Buyers who require duplication of internal drives, memory cards or optical media should consider a different device type.

Deciding specification: fifteen target ports

The single figure that determines fit is the fifteen target slots, allowing one source drive to be copied to fifteen destinations at once. If your workflow never exceeds a lower target count, a smaller duplicator will cost less and occupy less bench space.

Βασικά χαρακτηριστικά

  • Standalone operation — no computer or software required
  • Copies up to 15 USB drives simultaneously
  • Transfer speeds up to 100 MB per second
  • Asynchronous mode lets each channel load and copy independently
  • LCD screen with four-key control shows real-time status

Προδιαγραφές

BrandSystor
ModelSYSUSB30100-15
TypeUSB Flash Drive Duplicator
Target1 to 15
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

What USB standards does the SYSUSB30100-15 duplicator support and what is the maximum data transfer rate?

The duplicator supports USB 1.1, USB 2.0, USB 3.0 and USB 3.1 with a maximum data transfer rate of 100MB/sec.

How many target ports does the duplicator provide and what load type is used?

The unit provides 15 target ports and uses a slot load type for inserting USB flash drives.

Does the duplicator require a computer for operation and what copy modes are available?

The duplicator operates as a standalone unit with no computer required and offers both synchronous and asynchronous copy modes.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.