Systor SYS-USBD-55 USB Duplicator 55 Targets 33MB/s
- USB Flash Drive Dup…
- 1 to 55
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Systor
Standalone duplicator copies up to 15 USB flash drives at once with 300 MB/s transfer speed and 18 GB/min throughput
Target Size 1 to 15
Οι διαγραμμένες εκδόσεις υπάρχουν, αλλά δεν είναι διαθέσιμες εδώ.
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
This duplicator copies one source USB drive to fifteen targets simultaneously, reaching up to 300 MB per second and eighteen gigabytes per minute. It operates standalone with an LCD and four-button control, so no host computer or software is required during duplication.
The fifteen-target layout suits IT departments, duplication houses or OEM lines that must provision many flash drives at once. Buyers who only need occasional single-drive copies or software-based imaging will find the hardware overhead unnecessary.
Each of the fifteen channels loads, copies and unloads independently, so a slow target never blocks the others. This asynchronous behaviour is the specification that determines whether the unit matches a workflow that demands continuous, non-blocking throughput.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-15 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 15 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Plug the unit into 115V or 230V mains, insert the source USB drive into the top slot and up to 15 target drives into the lower slots, then press Start. The step often missed is selecting the correct copy mode — Quick Copy for FAT16, FAT32, NTFS or Linux EXT2/3/4, or Whole Media Copy for any other format — before starting.
The unit has no user-serviceable parts; the LCD screen and slot mechanisms are built for continuous standalone operation. Only the power cord may need replacement if damaged, and the 256 MB buffer memory is soldered and not upgradeable.
The 300 MB/s aggregate transfer rate caps total throughput, so copying to all 15 targets simultaneously divides that bandwidth. Thermal limits from the operating humidity range of 15 % to 90 % can also throttle extended sessions.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;