Systor SYS-USBD-55 USB Duplicator 55 Targets 33MB/s
- USB Flash Drive Dup…
- 1 to 55
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Systor
Standalone duplicator copies up to 15 USB flash drives at once with 300 MB/s transfer speed and 18 GB/min throughput
Target Size 1 to 15
Las versiones tachadas existen, pero no están disponibles aquí.
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
This duplicator copies one source USB drive to fifteen targets simultaneously, reaching up to 300 MB per second and eighteen gigabytes per minute. It operates standalone with an LCD and four-button control, so no host computer or software is required during duplication.
The fifteen-target layout suits IT departments, duplication houses or OEM lines that must provision many flash drives at once. Buyers who only need occasional single-drive copies or software-based imaging will find the hardware overhead unnecessary.
Each of the fifteen channels loads, copies and unloads independently, so a slow target never blocks the others. This asynchronous behaviour is the specification that determines whether the unit matches a workflow that demands continuous, non-blocking throughput.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-15 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 15 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Plug the unit into 115V or 230V mains, insert the source USB drive into the top slot and up to 15 target drives into the lower slots, then press Start. The step often missed is selecting the correct copy mode — Quick Copy for FAT16, FAT32, NTFS or Linux EXT2/3/4, or Whole Media Copy for any other format — before starting.
The unit has no user-serviceable parts; the LCD screen and slot mechanisms are built for continuous standalone operation. Only the power cord may need replacement if damaged, and the 256 MB buffer memory is soldered and not upgradeable.
The 300 MB/s aggregate transfer rate caps total throughput, so copying to all 15 targets simultaneously divides that bandwidth. Thermal limits from the operating humidity range of 15 % to 90 % can also throttle extended sessions.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?