Systor SYS-USBD-55 USB Duplicator 55 Targets 33MB/s
- USB Flash Drive Dup…
- 1 to 55
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Systor
Standalone duplicator copies up to 15 USB flash drives at once with 300 MB/s transfer speed and 18 GB/min throughput
Target Size 1 to 15
Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
This duplicator copies one source USB drive to fifteen targets simultaneously, reaching up to 300 MB per second and eighteen gigabytes per minute. It operates standalone with an LCD and four-button control, so no host computer or software is required during duplication.
The fifteen-target layout suits IT departments, duplication houses or OEM lines that must provision many flash drives at once. Buyers who only need occasional single-drive copies or software-based imaging will find the hardware overhead unnecessary.
Each of the fifteen channels loads, copies and unloads independently, so a slow target never blocks the others. This asynchronous behaviour is the specification that determines whether the unit matches a workflow that demands continuous, non-blocking throughput.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-15 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 15 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
Plug the unit into 115V or 230V mains, insert the source USB drive into the top slot and up to 15 target drives into the lower slots, then press Start. The step often missed is selecting the correct copy mode — Quick Copy for FAT16, FAT32, NTFS or Linux EXT2/3/4, or Whole Media Copy for any other format — before starting.
The unit has no user-serviceable parts; the LCD screen and slot mechanisms are built for continuous standalone operation. Only the power cord may need replacement if damaged, and the 256 MB buffer memory is soldered and not upgradeable.
The 300 MB/s aggregate transfer rate caps total throughput, so copying to all 15 targets simultaneously divides that bandwidth. Thermal limits from the operating humidity range of 15 % to 90 % can also throttle extended sessions.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?