Systor SYS-USBD-55 USB Duplicator 55 Targets 33MB/s
- USB Flash Drive Dup…
- 1 to 55
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Standalone duplicator copies up to 15 USB flash drives at once with 300 MB/s transfer speed and 18 GB/min throughput
Target Size 1 to 15
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
This duplicator copies one source USB drive to fifteen targets simultaneously, reaching up to 300 MB per second and eighteen gigabytes per minute. It operates standalone with an LCD and four-button control, so no host computer or software is required during duplication.
The fifteen-target layout suits IT departments, duplication houses or OEM lines that must provision many flash drives at once. Buyers who only need occasional single-drive copies or software-based imaging will find the hardware overhead unnecessary.
Each of the fifteen channels loads, copies and unloads independently, so a slow target never blocks the others. This asynchronous behaviour is the specification that determines whether the unit matches a workflow that demands continuous, non-blocking throughput.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-15 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 15 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Plug the unit into 115V or 230V mains, insert the source USB drive into the top slot and up to 15 target drives into the lower slots, then press Start. The step often missed is selecting the correct copy mode — Quick Copy for FAT16, FAT32, NTFS or Linux EXT2/3/4, or Whole Media Copy for any other format — before starting.
The unit has no user-serviceable parts; the LCD screen and slot mechanisms are built for continuous standalone operation. Only the power cord may need replacement if damaged, and the 256 MB buffer memory is soldered and not upgradeable.
The 300 MB/s aggregate transfer rate caps total throughput, so copying to all 15 targets simultaneously divides that bandwidth. Thermal limits from the operating humidity range of 15 % to 90 % can also throttle extended sessions.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?