Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone USB duplicator with LCD screen and fifteen target ports

Systor

Systor SYS15EXH 1-to-15 USB Duplicator & Sanitizer

SKU CH-GW39-KSR87

Standalone duplicator copies one USB drive to fifteen targets at 33 MB/s with LCD control

  • TypeDuplicator: USB flash drive to USB flash drive, USB flash dr
  • Target1 to 15
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1, USB 3.2, USB 3+ USB-powe
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Spanish, Portuguese, Japanese

Target Size 1 to 15

Näytä 7 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

DATA TRANSFER RATE For USB-Powered Portable Hard Drives

  • Standalone duplication with no PC required
  • Copies one source to fifteen targets simultaneously
  • Asynchronous mode starts copying as soon as drives are inserted
  • Bit-by-bit cloning ensures exact data replication
  • LCD screen with multilingual menus for easy operation

Standalone USB Duplicator & Sanitizer

The Systor SYS15EXH duplicates and sanitises USB flash drives and USB-powered portable external hard drives without a host computer. An LCD screen and simple controller buttons let operators start bit-by-bit copies with a single button press. It suits IT departments, duplicators and forensic teams that need reliable offline media cloning.

15-Target Asynchronous Copy Capacity

One source port feeds up to fifteen target ports simultaneously in asynchronous mode, so each target begins writing as soon as a drive is inserted. The unit supports USB 1.1, 2.0, 3.0, 3.1, 3.2 and 3+ devices with a sustained transfer rate of 33 MB/s and 256 MB of buffer memory to smooth data flow across all ports.

Low-Noise Standalone Operation

The duplicator runs from a standard 115 V or 230 V supply with no active cooling fans, so acoustic output stays negligible in office or lab environments. Its SATA controller handles continuous duplication cycles without a mandated cool-down period, keeping power draw modest while all fifteen ports write in parallel.

Kohokohdat

  • Standalone duplication with no PC required
  • Copies one source to fifteen targets simultaneously
  • Asynchronous mode starts copying as soon as drives are inserted
  • Bit-by-bit cloning ensures exact data replication
  • LCD screen with multilingual menus for easy operation

Tekniset tiedot

BrandSystor
ModelSYS15EXH
Part NumberSYS15EXH
TypeDuplicator:
USB flash drive to USB flash drive,
USB flash drive to USB-powered portable external hard drive,
USB-powered portable external hard drive to USB-powered portable external hard drive,
USB-powered portable external hard drive to USB flash drive
Target1 to 15
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1, USB 3.2, USB 3+
USB-powered portable external hard drive
Data Transfer Rate33MB/s
Language SupportEnglish, Spanish, Portuguese,
Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
FeaturesCOMPLETE STANDALONE : No computer or software needed
WARRANTY : 1 year parts, 3 years labor, lifetime technical support
ASYNCHRONOUS MODE : Duplication from master source port to blank target ports starts as soon as a source drive/device is inserted and a target drive/device is plugged into any target port
BIT-BY-BIT DUPLICATION : Performs a bit-by-bit copy from the USB-powered portable external source hard drive or USB flash drive
DUPLICATE USB FLASH DRIVE TO USB FLASH DRIVE : Copy from 1 single USB flash drive to USB flash drive(s)
DUPLICATE USB FLASH DRIVE TO USB-POWERED EXTERNAL
Power Supply115V or 230V
Package Contentssee pictures for details

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How fast does the duplicator actually copy data to each target?

The duplicator moves up to 33 MB/s from the source to each target, so copy time scales directly with the size of the drive you are cloning.

Which USB standards are supported and what speed ceiling do they impose?

The unit accepts USB 1.1, 2.0, 3.0, 3.1 and 3.2 devices, but the duplicator's own transfer rate caps at 33 MB/s regardless of the drive's rated speed.

What physical space and power connections does the unit need?

The standalone chassis runs on 115 V or 230 V mains power and provides 15 target ports plus one source port for USB-powered flash drives or portable external hard drives.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.