Systor SYSUSB30100-135 USB 3.0/3.1 Duplicator 1 to 135
- USB Flash Drive Dup…
- 1 to 135
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Standalone USB duplicator copies one source to 55 targets at up to 300 MB/s with bit-by-bit verification
Target Size 1 to 55
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
The Systor SYS-USB30-55 is a standalone USB flash drive duplicator and sanitizer that copies from one source to up to 55 targets simultaneously. It operates without a host computer and supports USB 1.1, 2.0, 3.0 and 3.1 media through slot-loading ports. A 256 MB buffer and an LCD screen with four-button control manage copy, compare and erase functions in English or Japanese.
This unit suits organisations that need to duplicate or securely erase large batches of USB flash drives on a regular basis. Asynchronous operation lets each channel load, unload and copy independently so there is no waiting between slots. Buyers who only process a few drives at a time or who need to duplicate internal storage media should consider a different solution.
The defining specification is the ability to write to 55 target drives at once in asynchronous mode, with a peak throughput of 300 MB/s (approximately 18 GB/min). This capacity determines whether the duplicator matches the volume requirements of the intended workload.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-55 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 55 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The unit offers 55 target slots so you can copy to 55 flash drives at once.
It runs standalone; just insert the source and target drives, select copy on the LCD, and start — no computer or software required.
The duplicator has no user-replaceable consumables; only the USB flash drives you insert are swapped out.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?