Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone USB duplicator with LCD screen and 87 target slots

Systor

Systor SYSUSB30100-87 USB 3.0/3.1 Duplicator 1 to 87 targets

SKU CH-YX8T-BZJMR

Standalone USB duplicator copies up to 87 drives simultaneously at 100 MB/s with bit-by-bit verification and DoD-compliant sanitisation

  • TypeUSB Flash Drive Duplicator
  • Target1 to 87
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 87

Näytä 7 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation — no computer or software needed
  • Copies up to 87 USB drives simultaneously
  • Transfer speeds up to 100MB per second
  • Bit-by-bit hardware compare verifies every copy
  • LCD screen with four-key control shows real-time status

Standalone USB 3.0/3.1 Duplicator with 87 Targets

The Systor SYSUSB30100-87 is a standalone duplicator that copies USB flash drives without a computer. It accepts one source and up to 87 target drives simultaneously through its slot-loading bays. An integrated LCD screen and four-key control panel manage every operation. The unit runs on 115V or 230V power and operates in humidity from 15 to 90 percent.

Suited for high-volume USB duplication.

IT departments, duplication services and OEMs that need to clone large batches of USB 1.1, 2.0, 3.0 or 3.1 flash drives will benefit from the asynchronous mode that lets each channel load, unload and copy independently. The copier supports FAT16, FAT32, NTFS and Linux EXT2/EXT3/EXT4 quick copy plus whole-media bit-for-bit duplication. Buyers who need to duplicate media other than USB flash drives should look at other equipment.

87 simultaneous target ports drive throughput

With 87 target slots the system can duplicate up to 87 drives in a single run, and the hardware buffer of 256M sustains a peak transfer rate of 100MB per second. Synchronous and asynchronous copy modes are selectable, and a bit-for-bit compare function verifies every copy. The built-in sanitiser performs quick and full erase cycles that meet DoD data-security standards.

Kohokohdat

  • Standalone operation — no computer or software needed
  • Copies up to 87 USB drives simultaneously
  • Transfer speeds up to 100MB per second
  • Bit-by-bit hardware compare verifies every copy
  • LCD screen with four-key control shows real-time status

Tekniset tiedot

BrandSystor
ModelSYSUSB30100-87
TypeUSB Flash Drive Duplicator
Target1 to 87
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick the 1-to-87-target model or a smaller duplicator?

Choose the 1-to-87 model when you regularly need to copy to dozens of USB drives at once; its 87 slots let you finish large batches in a single run, while smaller units would require multiple cycles.

What does the 100 MB/s transfer rate mean when I am actually copying drives?

The duplicator can move up to 100 MB each second, so a full 6 GB payload finishes in roughly one minute per target under ideal conditions.

Which USB standards does the duplicator support and what speed ceiling do they impose?

It accepts USB 1.1, 2.0, 3.0 and 3.1 drives; the hardware caps duplication at 100 MB/s regardless of the drive's own rated speed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.