Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black rectangular USB duplicator tower with 111 slots and LCD display

Systor

Systor SYSUSB30100-111 1-to-111 USB 3.0/3.1 Duplicator

SKU CH-N49T-VF327

Standalone USB flash drive duplicator copies up to 111 targets at 100 MB/s with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 111
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 111

Näytä 7 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation eliminates need for a computer
  • Copies up to 111 USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-for-bit hardware compare verifies every duplication
  • Quick and full erase meets DoD data-security standards

1-to-111 USB Duplicator for High-Volume Workflows

This standalone duplicator copies up to one hundred eleven USB flash drives simultaneously without a host computer. It targets IT departments, duplication service bureaus and manufacturers who need to deploy identical data sets across large batches of media. The unit operates independently through a four-button LCD interface in English or Japanese.

100 MB/s Transfer Rate with 256 MB Buffer

Each channel sustains up to one hundred megabytes per second, moving six gigabytes per minute when the source drive allows. The 256 MB buffer smooths bursts across synchronous and asynchronous modes, letting you load and unload drives without pausing other slots. Throughput drops when older USB 1.1 or 2.0 media are mixed in the same run.

Slot-Load Chassis with DoD-Erase and Multi-Format

The black slot-load frame accepts USB 1.1 through 3.1 drives and runs on 115 V or 230 V mains with humidity tolerance from fifteen to ninety percent. Quick Copy handles FAT16, FAT32, NTFS and Linux EXT2 through EXT4 file systems, while Whole Media mode duplicates every sector regardless of format. A built-in erase function meets DoD sanitisation standards and offers Auto, FAT and FAT32 formatting options.

Kohokohdat

  • Standalone operation eliminates need for a computer
  • Copies up to 111 USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-for-bit hardware compare verifies every duplication
  • Quick and full erase meets DoD data-security standards

Tekniset tiedot

BrandSystor
ModelSYSUSB30100-111
TypeUSB Flash Drive Duplicator
Target1 to 111
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Can the duplicator copy drives that use older USB 1.1 or 2.0 standards alongside newer USB 3.0 and 3.1 drives?

Yes, the unit supports USB 1.1, 2.0, 3.0 and 3.1 media simultaneously, so legacy and current drives can be duplicated in the same session.

How do I verify that each of the 111 target ports has finished a bit-for-bit copy without errors?

The LCD screen shows real-time status for every channel and the built-in hardware compare function confirms bit-by-bit accuracy once the copy completes.

Does the package include 111 USB cables or adapters, or must they be purchased separately?

The duplicator provides 111 target slots; cables or adapters for the source and target drives are not included and must be supplied by the user.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.