Systor SYSUSB30100-39 1 to 39 USB 3.0/3.1 Duplicator
- USB Flash Drive Dup…
- 1 to 39
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Standalone USB duplicator copies up to 47 flash drives simultaneously at 100 MB/s with bit-for-bit verification and DoD-compliant erase
Target Size 1 to 47
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]
The Systor SYSUSB30100-47 duplicates one source USB flash drive to up to 47 targets in a single session. It operates completely standalone with no computer or software required, driven by a built-in multi-core processor and controlled through a four-key LCD interface in English or Japanese.
The duplicator achieves a transfer rate of 100MB per second, reaching up to 6GB per minute during sustained copy jobs. Asynchronous mode allows each of the 47 channels to load, unload and copy independently, so operators can swap drives continuously without pausing the remaining targets.
Drives insert into slot-style ports behind a black front panel, with the LCD providing real-time status for every channel. The unit supports bit-for-bit comparison, three formatting modes (Auto, FAT, FAT32) and a full erase function conforming to DoD data-security standards, powered from either 115V or 230V supplies.
| Brand | Systor |
|---|---|
| Model | SYSUSB30100-47 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 47 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 100MB/sec |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The duplicator operates from a 115V or 230V supply and supports humidity from 15% to 90% during continuous standalone operation.
You need one source USB flash drive and up to 47 target USB drives in 1.1, 2.0, 3.0 or 3.1 formats; no computer or software is required.
It accepts USB 1.1, 2.0, 3.0 and 3.1 media and performs bit-by-bit comparison, but transfer speed depends on each drive's own capability.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?