暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator tower with LCD screen and 47 vertical slots

Systor

Systor SYSUSB30100-47 1 to 47 USB Duplicator

SKU CH-BGET-6C7PY

Standalone USB duplicator copies up to 47 flash drives simultaneously at 100 MB/s with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 47
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 47

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation eliminates the need for a host computer
  • Copies up to 47 USB drives simultaneously at 100MB/sec
  • Asynchronous mode lets each channel load and copy independently
  • Bit-for-bit compare verifies every duplication for data integrity
  • DoD-compliant erase sanitises drives with three format options

Target capacity and standalone operation

The Systor SYSUSB30100-47 duplicates one source USB flash drive to up to 47 targets in a single session. It operates completely standalone with no computer or software required, driven by a built-in multi-core processor and controlled through a four-key LCD interface in English or Japanese.

Sustained copy throughput and asynchronous workflow

The duplicator achieves a transfer rate of 100MB per second, reaching up to 6GB per minute during sustained copy jobs. Asynchronous mode allows each of the 47 channels to load, unload and copy independently, so operators can swap drives continuously without pausing the remaining targets.

Slot-loading build and data-sanitisation features

Drives insert into slot-style ports behind a black front panel, with the LCD providing real-time status for every channel. The unit supports bit-for-bit comparison, three formatting modes (Auto, FAT, FAT32) and a full erase function conforming to DoD data-security standards, powered from either 115V or 230V supplies.

特長

  • Standalone operation eliminates the need for a host computer
  • Copies up to 47 USB drives simultaneously at 100MB/sec
  • Asynchronous mode lets each channel load and copy independently
  • Bit-for-bit compare verifies every duplication for data integrity
  • DoD-compliant erase sanitises drives with three format options

仕様

BrandSystor
ModelSYSUSB30100-47
TypeUSB Flash Drive Duplicator
Target1 to 47
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the Systor SYSUSB30100-47 draw when running all 47 ports continuously?

The duplicator operates from a 115V or 230V supply and supports humidity from 15% to 90% during continuous standalone operation.

What must I already own to start copying with this duplicator?

You need one source USB flash drive and up to 47 target USB drives in 1.1, 2.0, 3.0 or 3.1 formats; no computer or software is required.

Will it copy older USB 1.1 or 2.0 drives at the same 100MB/sec rate?

It accepts USB 1.1, 2.0, 3.0 and 3.1 media and performs bit-by-bit comparison, but transfer speed depends on each drive's own capability.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。