暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with LCD screen and 55 slots

Systor

Systor SYSUSB30100-55 USB 3.0/3.1 Duplicator 1 to 55

SKU CH-ZACA-9TD1M

Standalone duplicator copies one USB source to 55 targets at 100 MB/s with LCD control

  • TypeUSB Flash Drive Duplicator
  • Target1 to 55
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 55

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation eliminates the need for a PC or software
  • Copies up to 55 USB drives simultaneously from a single source
  • Asynchronous mode lets each channel load, copy and unload independently
  • Hardware bit-by-bit compare verifies every copy for data integrity
  • DoD-compliant erase function securely wipes drives to recognised security standards

1-to-55 USB 3.0/3.1 Duplicator

The Systor SYSUSB30100-55 is a standalone USB flash drive duplicator and sanitizer that copies one source to up to 55 targets simultaneously. It operates without a host computer or software, using an internal multi-core processor and 256 MB of buffer memory. The unit supports USB 1.1, 2.0, 3.0 and 3.1 drives through slot-loading ports and reaches transfer speeds up to 100 MB/s.

Suitable users and limits

This duplicator suits IT departments, service bureaus and manufacturers who need high-volume USB media duplication or secure erasure in a self-contained appliance. It handles FAT16, FAT32, NTFS and Linux EXT2/3/4 file systems plus whole-media bit-for-bit copies. Buyers who require duplication of non-USB media such as SD cards or optical discs should look elsewhere.

Deciding specification

The single specification that determines fit is the 55-target capacity combined with USB 3.1 support at 100 MB/s. If your workflow demands more than 55 concurrent copies or requires interfaces other than USB, this model will not meet the requirement.

特長

  • Standalone operation eliminates the need for a PC or software
  • Copies up to 55 USB drives simultaneously from a single source
  • Asynchronous mode lets each channel load, copy and unload independently
  • Hardware bit-by-bit compare verifies every copy for data integrity
  • DoD-compliant erase function securely wipes drives to recognised security standards

仕様

BrandSystor
ModelSYSUSB30100-55
TypeUSB Flash Drive Duplicator
Target1 to 55
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the duplicator and what step is often missed?

Connect the 115V or 230V power supply, insert the source drive into the source slot and up to 55 target drives into the target slots, then press Start — the step often missed is selecting Synchronous or Asynchronous copy mode before starting.

What maintenance or replacement will the duplicator need later?

The LCD screen may dim over time and the slot mechanisms can wear with heavy use; keep the unit within the 15% to 90% operating humidity range to extend component life.

What limit appears first during sustained copying?

The 100MB per second (6GB per minute) transfer rate ceiling is the first bottleneck; each of the 55 channels shares this maximum throughput.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。