Systor SYS-USB30-15 1-to-15 USB 3.0/3.1 duplicator
- USB Flash Drive Dup…
- 1 to 15
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Systor
Standalone duplicator copies one USB source to 55 targets at 100 MB/s with LCD control
Target Size 1 to 55
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]
The Systor SYSUSB30100-55 is a standalone USB flash drive duplicator and sanitizer that copies one source to up to 55 targets simultaneously. It operates without a host computer or software, using an internal multi-core processor and 256 MB of buffer memory. The unit supports USB 1.1, 2.0, 3.0 and 3.1 drives through slot-loading ports and reaches transfer speeds up to 100 MB/s.
This duplicator suits IT departments, service bureaus and manufacturers who need high-volume USB media duplication or secure erasure in a self-contained appliance. It handles FAT16, FAT32, NTFS and Linux EXT2/3/4 file systems plus whole-media bit-for-bit copies. Buyers who require duplication of non-USB media such as SD cards or optical discs should look elsewhere.
The single specification that determines fit is the 55-target capacity combined with USB 3.1 support at 100 MB/s. If your workflow demands more than 55 concurrent copies or requires interfaces other than USB, this model will not meet the requirement.
| Brand | Systor |
|---|---|
| Model | SYSUSB30100-55 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 55 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 100MB/sec |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Connect the 115V or 230V power supply, insert the source drive into the source slot and up to 55 target drives into the target slots, then press Start — the step often missed is selecting Synchronous or Asynchronous copy mode before starting.
The LCD screen may dim over time and the slot mechanisms can wear with heavy use; keep the unit within the 15% to 90% operating humidity range to extend component life.
The 100MB per second (6GB per minute) transfer rate ceiling is the first bottleneck; each of the 55 channels shares this maximum throughput.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟