نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black standalone USB duplicator tower with 95 slots and LCD screen

Systor

Systor SYS-USBD-95 USB Duplicator 1 to 95 targets

SKU CH-DA9Y-X81P6

Duplicates up to 95 USB 1.1, 2.0 and 3.0 drives at 33 MB/s with synchronous or asynchronous modes and bit-by-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 95
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 95

عرض 7 تكوينات إضافية

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Duplicates 95 USB drives simultaneously without a PC
  • Asynchronous mode lets each slot load and copy independently
  • Bit-for-bit hardware compare verifies every copied drive
  • DoD-compliant erase securely wipes sensitive data in three modes
  • LCD control panel supports English, Japanese, Spanish and Portuguese

Systor SYS-USBD-95 Duplicator

The Systor SYS-USBD-95 is a standalone USB flash drive duplicator designed for high-volume copying environments. It handles one source and up to ninety-five target drives simultaneously without needing a host computer. This unit suits IT departments, duplication services, and manufacturers who need reliable mass deployment of USB media. It is not for users who only duplicate a few drives at a time.

Copy Speed and Buffer

The duplicator delivers a maximum data transfer rate of 33 MB/s, achieving up to 2 GB per minute copy speed. A 256 MB buffer memory supports sustained throughput across all channels. Quick Copy mode works with FAT16, FAT32, NTFS, and Linux EXT2/EXT3/EXT4 file systems, while Whole Media Copy duplicates every sector regardless of format. It does not accelerate encrypted or proprietary formats beyond the stated rate.

Standalone Operation and Erase

A four-button LCD interface controls synchronous and asynchronous copy modes, allowing each channel to load, unload, and copy independently. The unit performs bit-for-bit hardware comparison after duplication and includes a full erase function conforming to DoD data security standards. Power requirements are 115/230 V at 50/60 Hz with a 400 W supply. Ensure target drives are USB 1.1, 2.0, or 3.0 compatible; drives with non-standard connectors will not fit the slots.

أبرز المميزات

  • Duplicates 95 USB drives simultaneously without a PC
  • Asynchronous mode lets each slot load and copy independently
  • Bit-for-bit hardware compare verifies every copied drive
  • DoD-compliant erase securely wipes sensitive data in three modes
  • LCD control panel supports English, Japanese, Spanish and Portuguese

المواصفات

BrandSystor
ModelSYS-USBD-95
TypeUSB Flash Drive Duplicator
Target1 to 95
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What does the 33 MB/s transfer rate mean when the duplicator is running?

It sets the maximum throughput the unit can sustain while copying from the source drive to up to 95 targets simultaneously.

Which USB standards does the SATA-connected duplicator support and what speed ceiling do they impose?

It accepts USB 1.1, 2.0 and 3.0 drives, so the slowest attached device determines the practical copy speed for that port.

What physical connections and power does the SYS-USBD-95 need to operate?

A SATA interface for the source drive, 95 USB target slots, and a 115/230 V 400 W supply at 50/60 Hz.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.