نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Systor

Systor SYS-USBD-63 USB Duplicator 1 to 63 targets 33MB/s

SKU CH-Q62X-EYZQG

Standalone USB flash duplicator copies up to 63 drives at 33 MB/s with synchronous or asynchronous modes and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 63
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 63

عرض 7 تكوينات إضافية

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Copies up to 63 USB drives simultaneously
  • Asynchronous mode lets each channel work independently
  • Standalone operation needs no host computer
  • LCD screen with four-button control shows live status
  • Hardware bit-for-bit compare verifies every copy

Standalone USB Flash Drive Duplicator

This Systor duplicator copies up to 63 USB flash drives simultaneously without a computer. It supports USB 1.1, 2.0, and 3.0 devices at speeds up to 33 MB/s. The unit features a 256 MB buffer, an LCD screen, and four-key controls for standalone operation. Synchronous and asynchronous copy modes are both available.

High-volume duplication and sanitisation

It suits organisations that need to duplicate or securely erase large batches of USB media on a regular basis. The 600 W dual power supply and SATA connector support continuous, unattended runs. Buyers who only need occasional single-drive copies or require fewer than 16 target ports should consider a smaller model. The standalone design removes the need for host software or a connected PC.

63-target capacity decides fit

The single specification that determines suitability is the 1-to-63 target range. If your workflow demands more than 63 concurrent copies, this unit cannot meet that volume. If you need 63 or fewer targets, the asynchronous mode and 33 MB/s transfer rate handle the load. No other figure in the data changes this core capacity limit.

أبرز المميزات

  • Copies up to 63 USB drives simultaneously
  • Asynchronous mode lets each channel work independently
  • Standalone operation needs no host computer
  • LCD screen with four-button control shows live status
  • Hardware bit-for-bit compare verifies every copy

المواصفات

TypeUSB Flash Drive Duplicator
Target1 to 63
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What USB standard must the source and target drives support to reach the 33 MB/s transfer rate?

The duplicator supports USB 3.0, so drives that operate at USB 3.0 speeds are needed to achieve the 33 MB/s rate.

Can the duplicator copy to older USB 1.1 drives that I still have in storage?

Yes, the unit lists USB 1.1, USB 2.0 and USB 3.0 as supported media, so legacy USB 1.1 drives can be used as targets.

How does the LCD screen confirm that a copy finished without errors?

The duplicator performs a bit-for-bit hardware comparison after each job and shows the verification result on the LCD display.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.