Systor SYS-USB30-39 USB 3.0/3.1 Duplicator 1 to 39
- USB Flash Drive Dup…
- 1 to 39
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Systor
Standalone USB duplicator copies up to 167 drives simultaneously at 33 MB/s with asynchronous operation and bit-for-bit verification
Target Size 1 to 167
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]
The Systor SYS-USBD-167 is a standalone USB flash drive duplicator and sanitizer that copies up to 167 targets simultaneously. It operates without a host computer and supports USB 1.1, 2.0, and 3.0 media at speeds up to 33 MB/sec. A 256 MB buffer and multi-core processor manage synchronous and asynchronous copy modes.
This unit fits IT departments, duplication services, and forensic teams that need bit-for-bit copies of many USB drives at once with DoD-compliant erase functions. It is not suited for users who only duplicate occasional single drives or who require media support beyond the listed USB standards.
The defining specification is the ability to load, unload, and copy on each of the 167 channels independently in asynchronous mode, eliminating wait time between batches. Synchronous mode is also available for verification-heavy workflows, and the LCD panel reports real-time status for every port.
| Brand | Systor |
|---|---|
| Model | SYS-USBD-167 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 167 |
| Buffer Memory | 256 MB |
| Supported Media | USB 1.1, USB 2.0, & USB 3.0 |
| Data Transfer Rate | 33MB/s |
| Language Support | English, Japanese, Spanish, Portuguese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Synchronous or Asynchronous mode |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Power Supply | 115/230 V, 50/60 Hz, 400 W |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The duplicator is a standalone unit with 167 target ports and an LCD screen; no flash drives or extra cables are included, so you provide every USB 1.1, 2.0 or 3.0 drive you want to copy.
Asynchronous mode lets each of the 167 channels load, unload and copy independently at up to 33 MB/s, while synchronous mode waits for all ports to be ready before starting a single batch copy.
The 33 MB/s peak is the hardware limit; actual throughput per port depends on each drive's own read/write capability, so USB 2.0 media will run slower while USB 3.0 drives can approach the maximum rate.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟