نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Systor

Systor SYSUSB30100-71 USB 3.0/3.1 Duplicator 1 to 71 targets

SKU CH-QC30-4MA9X

Standalone USB 3.0/3.1 duplicator copies one source to 71 targets at up to 100 MB/sec with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 71
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 71

عرض 7 تكوينات إضافية

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation with no computer or software required
  • Copies up to 71 USB targets simultaneously
  • Transfer speeds reach 100 MB per second
  • Bit-for-bit comparison verifies every duplication
  • LCD screen with four-key control shows real-time status

Standalone 71-target USB duplicator

This Systor SYSUSB30100-71 unit copies up to 71 USB flash drives simultaneously without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media through slot-load ports. An LCD screen and four-key panel control synchronous or asynchronous copy modes. The system delivers up to 100 MB per second transfer rates.

High-volume duplication and sanitisation

Organisations that need to replicate or erase large batches of USB drives in a standalone appliance will suit this device. It handles FAT16, FAT32, NTFS and Linux file systems in quick-copy mode and offers whole-media bit-for-bit duplication. Buyers who only copy one or two drives occasionally, or who require interfaces other than USB, should consider alternative solutions.

71 simultaneous target ports

The single specification that determines fit is the 1-to-71 target capacity, allowing one source drive to populate 71 destinations in a single operation. Buffer memory of 256 MB sustains the 100 MB per second peak rate across all channels. Power input accepts 115 V or 230 V, and operating humidity ranges from 15 to 90 percent.

أبرز المميزات

  • Standalone operation with no computer or software required
  • Copies up to 71 USB targets simultaneously
  • Transfer speeds reach 100 MB per second
  • Bit-for-bit comparison verifies every duplication
  • LCD screen with four-key control shows real-time status

المواصفات

BrandSystor
ModelSYSUSB30100-71
TypeUSB Flash Drive Duplicator
Target1 to 71
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What does the 100MB/sec transfer rate mean when copying 71 USB drives at once?

The duplicator copies each drive at up to 100MB/sec independently, so all 71 targets can run at that speed simultaneously without slowing each other down.

Which USB standards does the duplicator support and what speed ceiling do they set?

It accepts USB 1.1, 2.0, 3.0 and 3.1 drives; the hardware caps each channel at 100MB/sec regardless of the drive’s own rating.

What power supply does the unit need to run 71 ports?

It operates on 115V or 230V mains power, auto-switching between the two voltages.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.