Systor SYS-USBD-39 USB Duplicator 1 to 39 targets 33MB/s
- USB Flash Drive Dup…
- 1 to 39
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Systor
Standalone USB 3.0/3.1 duplicator copies one source to 23 targets at up to 100MB/sec with LCD control
Target Size 1 to 23
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]
The Systor SYSUSB30100-23 is a standalone duplicator that copies one source USB flash drive to up to 23 targets simultaneously. It operates without a host computer or software, using an integrated multi-core processor and 256 MB buffer memory. The unit supports USB 1.1, 2.0, 3.0 and 3.1 drives and reaches a transfer rate of 100 MB per second. An LCD screen and four-button control panel manage all operations.
This duplicator suits organisations that need to clone or sanitise large batches of USB flash drives quickly. Asynchronous copy mode lets each channel load, unload and copy independently, so operators can swap targets without pausing other ports. Bit-for-bit comparison and DoD-compliant erase functions provide verification and secure sanitisation. Buyers who need to duplicate internal drives, memory cards or interfaces other than USB should look elsewhere.
The single specification that decides fit is the 23-port capacity combined with a maximum transfer rate of 100 MB per second. This determines how many drives can be processed in parallel and the shortest possible cycle time for a given image size. Power input accepts 115 V or 230 V, and operating humidity range is 15 to 90 percent.
| Brand | Systor |
|---|---|
| Model | SYSUSB30100-23 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 23 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 100MB/sec |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the Quick Copy mode supports FAT16 and FAT32 along with NTFS and Linux EXT2/EXT3/EXT4, so legacy drives are copied without reformatting.
The built-in bit-for-bit hardware comparison runs after every duplication and the LCD screen shows real-time pass or fail status for every channel.
The box contains the standalone duplicator with LCD control panel and power supply; USB flash drives are not included and must be purchased separately.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟