Systor SYS-USBD-39 USB Duplicator 1 to 39 targets 33MB/s
- USB Flash Drive Dup…
- 1 to 39
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
Systor
Standalone USB 3.0/3.1 duplicator copies one source to 23 targets at up to 100MB/sec with LCD control
Target Size 1 to 23
De overstregede versioner findes, men er ikke på lager her.
DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]
The Systor SYSUSB30100-23 is a standalone duplicator that copies one source USB flash drive to up to 23 targets simultaneously. It operates without a host computer or software, using an integrated multi-core processor and 256 MB buffer memory. The unit supports USB 1.1, 2.0, 3.0 and 3.1 drives and reaches a transfer rate of 100 MB per second. An LCD screen and four-button control panel manage all operations.
This duplicator suits organisations that need to clone or sanitise large batches of USB flash drives quickly. Asynchronous copy mode lets each channel load, unload and copy independently, so operators can swap targets without pausing other ports. Bit-for-bit comparison and DoD-compliant erase functions provide verification and secure sanitisation. Buyers who need to duplicate internal drives, memory cards or interfaces other than USB should look elsewhere.
The single specification that decides fit is the 23-port capacity combined with a maximum transfer rate of 100 MB per second. This determines how many drives can be processed in parallel and the shortest possible cycle time for a given image size. Power input accepts 115 V or 230 V, and operating humidity range is 15 to 90 percent.
| Brand | Systor |
|---|---|
| Model | SYSUSB30100-23 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 23 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 100MB/sec |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Andre versioner af denne model
Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.
Yes, the Quick Copy mode supports FAT16 and FAT32 along with NTFS and Linux EXT2/EXT3/EXT4, so legacy drives are copied without reformatting.
The built-in bit-for-bit hardware comparison runs after every duplication and the LCD screen shows real-time pass or fail status for every channel.
The box contains the standalone duplicator with LCD control panel and power supply; USB flash drives are not included and must be purchased separately.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ingen sprog matcher.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?