Systor SYSUSB30100-63 1 to 63 USB 3.0/3.1 Duplicator
- USB Flash Drive Dup…
- 1 to 63
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Systor
Standalone USB duplicator copies one source to 23 targets at up to 300 MB/s with bit-by-bit verification
Target Size 1 to 23
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
The Systor SYS-USB30-23 is a standalone USB 3.1 duplicator that copies one source drive to up to twenty-three targets without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a maximum transfer rate of 300 MB/s with 256 MB of buffer memory. An LCD screen and four-button control panel manage synchronous or asynchronous copy modes.
Organisations that regularly duplicate bootable drives, firmware images or data sets across many USB sticks will benefit from the asynchronous operation that lets each channel load, unload and copy independently. The unit handles FAT16, FAT32, NTFS and Linux EXT2/3/4 formats in quick-copy mode and falls back to whole-media bit-by-bit copying for other formats. Buyers who require duplication of interfaces other than USB, or who need more than twenty-three simultaneous targets, should consider a different platform.
The defining specification is the twenty-three independent copy channels that operate asynchronously, allowing continuous throughput up to 18 GB/min without waiting for the slowest target to finish. This channel count and the asynchronous architecture together determine whether the duplicator matches the required cloning volume.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-23 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 23 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The duplicator offers 23 target slots so you can copy one source drive to 23 destinations at once.
It copies at up to 300 MB/s (18 GB/min) and runs from a standard 115 V or 230 V supply without a built-in fan.
No — it is a standalone unit with a 4-key LCD panel, so it works without a computer or extra software.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟