Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black standalone USB duplicator tower with 95 slots and LCD screen

Systor

Systor SYS-USBD-95 USB Duplicator 1 to 95 targets

SKU CH-DA9Y-X81P6

Duplicates up to 95 USB 1.1, 2.0 and 3.0 drives at 33 MB/s with synchronous or asynchronous modes and bit-by-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 95
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 95

Zobrazit dalších 7 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Duplicates 95 USB drives simultaneously without a PC
  • Asynchronous mode lets each slot load and copy independently
  • Bit-for-bit hardware compare verifies every copied drive
  • DoD-compliant erase securely wipes sensitive data in three modes
  • LCD control panel supports English, Japanese, Spanish and Portuguese

Systor SYS-USBD-95 Duplicator

The Systor SYS-USBD-95 is a standalone USB flash drive duplicator designed for high-volume copying environments. It handles one source and up to ninety-five target drives simultaneously without needing a host computer. This unit suits IT departments, duplication services, and manufacturers who need reliable mass deployment of USB media. It is not for users who only duplicate a few drives at a time.

Copy Speed and Buffer

The duplicator delivers a maximum data transfer rate of 33 MB/s, achieving up to 2 GB per minute copy speed. A 256 MB buffer memory supports sustained throughput across all channels. Quick Copy mode works with FAT16, FAT32, NTFS, and Linux EXT2/EXT3/EXT4 file systems, while Whole Media Copy duplicates every sector regardless of format. It does not accelerate encrypted or proprietary formats beyond the stated rate.

Standalone Operation and Erase

A four-button LCD interface controls synchronous and asynchronous copy modes, allowing each channel to load, unload, and copy independently. The unit performs bit-for-bit hardware comparison after duplication and includes a full erase function conforming to DoD data security standards. Power requirements are 115/230 V at 50/60 Hz with a 400 W supply. Ensure target drives are USB 1.1, 2.0, or 3.0 compatible; drives with non-standard connectors will not fit the slots.

Přednosti

  • Duplicates 95 USB drives simultaneously without a PC
  • Asynchronous mode lets each slot load and copy independently
  • Bit-for-bit hardware compare verifies every copied drive
  • DoD-compliant erase securely wipes sensitive data in three modes
  • LCD control panel supports English, Japanese, Spanish and Portuguese

Specifikace

BrandSystor
ModelSYS-USBD-95
TypeUSB Flash Drive Duplicator
Target1 to 95
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the 33 MB/s transfer rate mean when the duplicator is running?

It sets the maximum throughput the unit can sustain while copying from the source drive to up to 95 targets simultaneously.

Which USB standards does the SATA-connected duplicator support and what speed ceiling do they impose?

It accepts USB 1.1, 2.0 and 3.0 drives, so the slowest attached device determines the practical copy speed for that port.

What physical connections and power does the SYS-USBD-95 need to operate?

A SATA interface for the source drive, 95 USB target slots, and a 115/230 V 400 W supply at 50/60 Hz.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.