Systor SYSUSB30100-79 1 to 79 USB 3.0/3.1 Duplicator
- USB Flash Drive Dup…
- 1 to 79
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Copies up to 135 USB drives simultaneously at 33 MB/s with standalone operation and bit-for-bit verification
Target Size 1 to 135
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]
The Systor SYS-USBD-135 is a standalone USB flash drive duplicator that copies up to 135 targets simultaneously without a host computer. It supports USB 1.1, USB 2.0 and USB 3.0 media at speeds up to 33 MB/s and includes a 256 MB buffer. A 400 W power supply operates on 115 or 230 V at 50 or 60 Hz.
Organisations that need to clone large batches of USB drives in synchronous or asynchronous mode will benefit from the 4-key LCD interface and bit-for-bit compare function. The unit also provides quick and full erase functions conforming to DoD standards. It does not suit buyers who require network-attached operation or direct SATA drive duplication.
The defining specification is the ability to duplicate up to 135 USB targets asynchronously, allowing independent load, unload and copy cycles per channel. This capacity decides whether the duplicator matches the required throughput for mass deployment or sanitisation workflows.
| Brand | Systor |
|---|---|
| Model | SYS-USBD-135 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 135 |
| Buffer Memory | 256 MB |
| Supported Media | USB 1.1, USB 2.0, & USB 3.0 |
| Data Transfer Rate | 33MB/s |
| Language Support | English, Japanese, Spanish, Portuguese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Synchronous or Asynchronous mode |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Power Supply | 115/230 V, 50/60 Hz, 400 W |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The duplicator supports 1 to 135 targets simultaneously for high-volume flash drive production.
The internal supply is rated at 400 W and accepts 115/230 V at 50/60 Hz for sustained operation.
It runs completely standalone; the SATA connector is for internal use only and no computer is required.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?