Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Systor

Systor SYS-USBD-39 USB Duplicator 1 to 39 targets 33MB/s

SKU CH-KDQE-HFMZZ

Standalone USB flash drive duplicator copies up to 39 targets simultaneously at 33 MB/s with synchronous and asynchronous modes

  • TypeUSB Flash Drive Duplicator
  • Target1 to 39
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Copies 39 USB drives simultaneously
  • 33 MB/s transfer rate for fast duplication
  • 256 MB buffer ensures smooth data flow
  • Standalone operation with LCD control
  • Supports USB 1.1, 2.0 and 3.0 drives

What this duplicator does

The Systor SYS-USBD-39 is a standalone USB flash drive duplicator and sanitizer that copies up to 39 targets simultaneously without a host computer. It supports USB 1.1, 2.0 and 3.0 drives and transfers data at up to 33 MB/s. A 256 MB buffer and multi-core processor handle synchronous or asynchronous copy modes. The unit erases media to DoD standards and formats in Auto, FAT or FAT32.

Who this suits and who it does not

IT departments, duplication houses and forensic labs that need high-volume, bit-for-bit cloning of USB sticks will benefit from the 39-port capacity and standalone operation. Buyers who only duplicate a few drives at a time or who require network-managed control should look at smaller or PC-connected alternatives.

The specification that decides fit

The fixed 39 target ports and SATA internal connector set the physical and throughput limits of the system. If your workflow demands more than 39 concurrent copies or a different host interface, this unit cannot meet that requirement.

Kohokohdat

  • Copies 39 USB drives simultaneously
  • 33 MB/s transfer rate for fast duplication
  • 256 MB buffer ensures smooth data flow
  • Standalone operation with LCD control
  • Supports USB 1.1, 2.0 and 3.0 drives

Tekniset tiedot

TypeUSB Flash Drive Duplicator
Target1 to 39
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I confirm the duplicator copied every bit correctly after a run finishes?

The LCD screen shows real-time progress and a bit-for-bit hardware comparison result once the copy completes, confirming successful duplication.

What comes with the unit and what must I provide to start duplicating?

The duplicator includes the main unit with 39 target slots, LCD display, and internal 256 MB buffer; you supply the source USB drive and up to 39 target USB drives.

Which copy mode should I choose for my workload?

Use Synchronous mode when all target drives are identical and you want them written simultaneously, or Asynchronous mode to load, unload, and copy each channel independently without waiting.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.