Systor SYS-USBD-31 USB Duplicator 1 to 31 targets 33MB/s
- USB Flash Drive Dup…
- 1 to 31
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Systor
Standalone USB flash drive duplicator copies up to 39 targets simultaneously at 33 MB/s with synchronous and asynchronous modes
Target Size 1 to 39
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]
The Systor SYS-USBD-39 is a standalone USB flash drive duplicator and sanitizer that copies up to 39 targets simultaneously without a host computer. It supports USB 1.1, 2.0 and 3.0 drives and transfers data at up to 33 MB/s. A 256 MB buffer and multi-core processor handle synchronous or asynchronous copy modes. The unit erases media to DoD standards and formats in Auto, FAT or FAT32.
IT departments, duplication houses and forensic labs that need high-volume, bit-for-bit cloning of USB sticks will benefit from the 39-port capacity and standalone operation. Buyers who only duplicate a few drives at a time or who require network-managed control should look at smaller or PC-connected alternatives.
The fixed 39 target ports and SATA internal connector set the physical and throughput limits of the system. If your workflow demands more than 39 concurrent copies or a different host interface, this unit cannot meet that requirement.
| Type | USB Flash Drive Duplicator |
|---|---|
| Target | 1 to 39 |
| Buffer Memory | 256 MB |
| Supported Media | USB 1.1, USB 2.0, & USB 3.0 |
| Data Transfer Rate | 33MB/s |
| Language Support | English, Japanese, Spanish, Portuguese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Synchronous or Asynchronous mode |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Power Supply | 115/230 V, 50/60 Hz, 400 W |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The LCD screen shows real-time progress and a bit-for-bit hardware comparison result once the copy completes, confirming successful duplication.
The duplicator includes the main unit with 39 target slots, LCD display, and internal 256 MB buffer; you supply the source USB drive and up to 39 target USB drives.
Use Synchronous mode when all target drives are identical and you want them written simultaneously, or Asynchronous mode to load, unload, and copy each channel independently without waiting.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?