Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black standalone USB duplicator with LCD screen and 15 target slots

Systor

Systor SYSUSB30100-15 USB 3.0/3.1 Duplicator 1 to 15

SKU CH-813Q-TB6KY

Standalone duplicator copies one USB flash drive to fifteen targets at up to 100 MB/s with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 15
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 15

Skatīt vēl 7 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation — no computer or software required
  • Copies up to 15 USB drives simultaneously
  • Transfer speeds up to 100 MB per second
  • Asynchronous mode lets each channel load and copy independently
  • LCD screen with four-key control shows real-time status

1-to-15 USB 3.0/3.1 Duplicator

This standalone duplicator copies up to fifteen USB flash drives simultaneously without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media with a 256 MB buffer and an LCD control panel. The unit operates on 115 V or 230 V power and includes quick-erase functions that meet DoD standards.

Target users and alternatives

It suits IT departments, duplication services or forensic teams that need high-volume, bit-for-bit cloning of USB storage in FAT16, FAT32, NTFS or Linux file systems. Buyers who require duplication of internal drives, memory cards or optical media should consider a different device type.

Deciding specification: fifteen target ports

The single figure that determines fit is the fifteen target slots, allowing one source drive to be copied to fifteen destinations at once. If your workflow never exceeds a lower target count, a smaller duplicator will cost less and occupy less bench space.

Priekšrocības

  • Standalone operation — no computer or software required
  • Copies up to 15 USB drives simultaneously
  • Transfer speeds up to 100 MB per second
  • Asynchronous mode lets each channel load and copy independently
  • LCD screen with four-key control shows real-time status

Specifikācijas

BrandSystor
ModelSYSUSB30100-15
TypeUSB Flash Drive Duplicator
Target1 to 15
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What USB standards does the SYSUSB30100-15 duplicator support and what is the maximum data transfer rate?

The duplicator supports USB 1.1, USB 2.0, USB 3.0 and USB 3.1 with a maximum data transfer rate of 100MB/sec.

How many target ports does the duplicator provide and what load type is used?

The unit provides 15 target ports and uses a slot load type for inserting USB flash drives.

Does the duplicator require a computer for operation and what copy modes are available?

The duplicator operates as a standalone unit with no computer required and offers both synchronous and asynchronous copy modes.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.