暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with LCD screen and 39 target slots

Systor

Systor SYS-USBD-39 USB Duplicator 1 to 39 targets 33MB/s

SKU CH-KDQE-HFMZZ

Standalone USB flash drive duplicator copies up to 39 targets simultaneously at 33 MB/s with synchronous and asynchronous modes

  • TypeUSB Flash Drive Duplicator
  • Target1 to 39
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 39

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Copies 39 USB drives simultaneously
  • 33 MB/s transfer rate for fast duplication
  • 256 MB buffer ensures smooth data flow
  • Standalone operation with LCD control
  • Supports USB 1.1, 2.0 and 3.0 drives

What this duplicator does

The Systor SYS-USBD-39 is a standalone USB flash drive duplicator and sanitizer that copies up to 39 targets simultaneously without a host computer. It supports USB 1.1, 2.0 and 3.0 drives and transfers data at up to 33 MB/s. A 256 MB buffer and multi-core processor handle synchronous or asynchronous copy modes. The unit erases media to DoD standards and formats in Auto, FAT or FAT32.

Who this suits and who it does not

IT departments, duplication houses and forensic labs that need high-volume, bit-for-bit cloning of USB sticks will benefit from the 39-port capacity and standalone operation. Buyers who only duplicate a few drives at a time or who require network-managed control should look at smaller or PC-connected alternatives.

The specification that decides fit

The fixed 39 target ports and SATA internal connector set the physical and throughput limits of the system. If your workflow demands more than 39 concurrent copies or a different host interface, this unit cannot meet that requirement.

特長

  • Copies 39 USB drives simultaneously
  • 33 MB/s transfer rate for fast duplication
  • 256 MB buffer ensures smooth data flow
  • Standalone operation with LCD control
  • Supports USB 1.1, 2.0 and 3.0 drives

仕様

TypeUSB Flash Drive Duplicator
Target1 to 39
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I confirm the duplicator copied every bit correctly after a run finishes?

The LCD screen shows real-time progress and a bit-for-bit hardware comparison result once the copy completes, confirming successful duplication.

What comes with the unit and what must I provide to start duplicating?

The duplicator includes the main unit with 39 target slots, LCD display, and internal 256 MB buffer; you supply the source USB drive and up to 39 target USB drives.

Which copy mode should I choose for my workload?

Use Synchronous mode when all target drives are identical and you want them written simultaneously, or Asynchronous mode to load, unload, and copy each channel independently without waiting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。