暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rectangular USB duplicator unit with front LCD screen and 135 target slots

Systor

Systor SYS-USBD-135 USB Duplicator 1 to 135 Targets

SKU CH-MQN8-0TBPS

Copies up to 135 USB drives simultaneously at 33 MB/s with standalone operation and bit-for-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 135
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 135

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Copies 135 USB drives simultaneously with 135 target ports
  • Standalone operation needs no PC or software installed
  • 33 MB/s transfer rate and 2 GB/min copy speed
  • Bit-by-bit comparison plus DoD-compliant erase ensures data integrity
  • LCD interface supports English, Japanese, Spanish and Portuguese

1-to-135 USB Duplicator & Sanitizer

The Systor SYS-USBD-135 is a standalone USB flash drive duplicator that copies up to 135 targets simultaneously without a host computer. It supports USB 1.1, USB 2.0 and USB 3.0 media at speeds up to 33 MB/s and includes a 256 MB buffer. A 400 W power supply operates on 115 or 230 V at 50 or 60 Hz.

High-volume duplication with LCD control

Organisations that need to clone large batches of USB drives in synchronous or asynchronous mode will benefit from the 4-key LCD interface and bit-for-bit compare function. The unit also provides quick and full erase functions conforming to DoD standards. It does not suit buyers who require network-attached operation or direct SATA drive duplication.

135-target asynchronous copy

The defining specification is the ability to duplicate up to 135 USB targets asynchronously, allowing independent load, unload and copy cycles per channel. This capacity decides whether the duplicator matches the required throughput for mass deployment or sanitisation workflows.

特長

  • Copies 135 USB drives simultaneously with 135 target ports
  • Standalone operation needs no PC or software installed
  • 33 MB/s transfer rate and 2 GB/min copy speed
  • Bit-by-bit comparison plus DoD-compliant erase ensures data integrity
  • LCD interface supports English, Japanese, Spanish and Portuguese

仕様

BrandSystor
ModelSYS-USBD-135
TypeUSB Flash Drive Duplicator
Target1 to 135
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How many USB targets can the SYS-USBD-135 copy to at once?

The duplicator supports 1 to 135 targets simultaneously for high-volume flash drive production.

What is the power draw of the unit when running all 135 ports continuously?

The internal supply is rated at 400 W and accepts 115/230 V at 50/60 Hz for sustained operation.

Does the duplicator need a host PC or SATA connection to operate?

It runs completely standalone; the SATA connector is for internal use only and no computer is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。