เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Systor

Systor SYS-USBD-135 USB Duplicator 1 to 135 Targets

SKU CH-MQN8-0TBPS

Copies up to 135 USB drives simultaneously at 33 MB/s with standalone operation and bit-for-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 135
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 135

ดูตัวเลือกเพิ่มอีก 7 แบบ

ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Copies 135 USB drives simultaneously with 135 target ports
  • Standalone operation needs no PC or software installed
  • 33 MB/s transfer rate and 2 GB/min copy speed
  • Bit-by-bit comparison plus DoD-compliant erase ensures data integrity
  • LCD interface supports English, Japanese, Spanish and Portuguese

1-to-135 USB Duplicator & Sanitizer

The Systor SYS-USBD-135 is a standalone USB flash drive duplicator that copies up to 135 targets simultaneously without a host computer. It supports USB 1.1, USB 2.0 and USB 3.0 media at speeds up to 33 MB/s and includes a 256 MB buffer. A 400 W power supply operates on 115 or 230 V at 50 or 60 Hz.

High-volume duplication with LCD control

Organisations that need to clone large batches of USB drives in synchronous or asynchronous mode will benefit from the 4-key LCD interface and bit-for-bit compare function. The unit also provides quick and full erase functions conforming to DoD standards. It does not suit buyers who require network-attached operation or direct SATA drive duplication.

135-target asynchronous copy

The defining specification is the ability to duplicate up to 135 USB targets asynchronously, allowing independent load, unload and copy cycles per channel. This capacity decides whether the duplicator matches the required throughput for mass deployment or sanitisation workflows.

จุดเด่น

  • Copies 135 USB drives simultaneously with 135 target ports
  • Standalone operation needs no PC or software installed
  • 33 MB/s transfer rate and 2 GB/min copy speed
  • Bit-by-bit comparison plus DoD-compliant erase ensures data integrity
  • LCD interface supports English, Japanese, Spanish and Portuguese

ข้อมูลจำเพาะ

BrandSystor
ModelSYS-USBD-135
TypeUSB Flash Drive Duplicator
Target1 to 135
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

รุ่นอื่นในตระกูลเดียวกัน

อีก 5 รุ่นในตระกูลเดียวกัน

ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ

คำถามเกี่ยวกับสินค้านี้

How many USB targets can the SYS-USBD-135 copy to at once?

The duplicator supports 1 to 135 targets simultaneously for high-volume flash drive production.

What is the power draw of the unit when running all 135 ports continuously?

The internal supply is rated at 400 W and accepts 115/230 V at 50/60 Hz for sustained operation.

Does the duplicator need a host PC or SATA connection to operate?

It runs completely standalone; the SATA connector is for internal use only and no computer is required.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที