Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

Systor

Systor SYS-USBD-135 USB Duplicator 1 to 135 Targets

SKU CH-MQN8-0TBPS

Copies up to 135 USB drives simultaneously at 33 MB/s with standalone operation and bit-for-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 135
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Versi yang dicoret wujud, tetapi tidak tersedia di sini.

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Copies 135 USB drives simultaneously with 135 target ports
  • Standalone operation needs no PC or software installed
  • 33 MB/s transfer rate and 2 GB/min copy speed
  • Bit-by-bit comparison plus DoD-compliant erase ensures data integrity
  • LCD interface supports English, Japanese, Spanish and Portuguese

1-to-135 USB Duplicator & Sanitizer

The Systor SYS-USBD-135 is a standalone USB flash drive duplicator that copies up to 135 targets simultaneously without a host computer. It supports USB 1.1, USB 2.0 and USB 3.0 media at speeds up to 33 MB/s and includes a 256 MB buffer. A 400 W power supply operates on 115 or 230 V at 50 or 60 Hz.

High-volume duplication with LCD control

Organisations that need to clone large batches of USB drives in synchronous or asynchronous mode will benefit from the 4-key LCD interface and bit-for-bit compare function. The unit also provides quick and full erase functions conforming to DoD standards. It does not suit buyers who require network-attached operation or direct SATA drive duplication.

135-target asynchronous copy

The defining specification is the ability to duplicate up to 135 USB targets asynchronously, allowing independent load, unload and copy cycles per channel. This capacity decides whether the duplicator matches the required throughput for mass deployment or sanitisation workflows.

Ciri-ciri utama

  • Copies 135 USB drives simultaneously with 135 target ports
  • Standalone operation needs no PC or software installed
  • 33 MB/s transfer rate and 2 GB/min copy speed
  • Bit-by-bit comparison plus DoD-compliant erase ensures data integrity
  • LCD interface supports English, Japanese, Spanish and Portuguese

Spesifikasi

BrandSystor
ModelSYS-USBD-135
TypeUSB Flash Drive Duplicator
Target1 to 135
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How many USB targets can the SYS-USBD-135 copy to at once?

The duplicator supports 1 to 135 targets simultaneously for high-volume flash drive production.

What is the power draw of the unit when running all 135 ports continuously?

The internal supply is rated at 400 W and accepts 115/230 V at 50/60 Hz for sustained operation.

Does the duplicator need a host PC or SATA connection to operate?

It runs completely standalone; the SATA connector is for internal use only and no computer is required.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.