Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black standalone USB duplicator with LCD screen and 87 target slots

Systor

Systor SYSUSB30100-87 USB 3.0/3.1 Duplicator 1 to 87 targets

SKU CH-YX8T-BZJMR

Standalone USB duplicator copies up to 87 drives simultaneously at 100 MB/s with bit-by-bit verification and DoD-compliant sanitisation

  • TypeUSB Flash Drive Duplicator
  • Target1 to 87
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 87

Visa 7 fler konfigurationer

Genomstrukna varianter finns, men är inte i lager här.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation — no computer or software needed
  • Copies up to 87 USB drives simultaneously
  • Transfer speeds up to 100MB per second
  • Bit-by-bit hardware compare verifies every copy
  • LCD screen with four-key control shows real-time status

Standalone USB 3.0/3.1 Duplicator with 87 Targets

The Systor SYSUSB30100-87 is a standalone duplicator that copies USB flash drives without a computer. It accepts one source and up to 87 target drives simultaneously through its slot-loading bays. An integrated LCD screen and four-key control panel manage every operation. The unit runs on 115V or 230V power and operates in humidity from 15 to 90 percent.

Suited for high-volume USB duplication.

IT departments, duplication services and OEMs that need to clone large batches of USB 1.1, 2.0, 3.0 or 3.1 flash drives will benefit from the asynchronous mode that lets each channel load, unload and copy independently. The copier supports FAT16, FAT32, NTFS and Linux EXT2/EXT3/EXT4 quick copy plus whole-media bit-for-bit duplication. Buyers who need to duplicate media other than USB flash drives should look at other equipment.

87 simultaneous target ports drive throughput

With 87 target slots the system can duplicate up to 87 drives in a single run, and the hardware buffer of 256M sustains a peak transfer rate of 100MB per second. Synchronous and asynchronous copy modes are selectable, and a bit-for-bit compare function verifies every copy. The built-in sanitiser performs quick and full erase cycles that meet DoD data-security standards.

I korthet

  • Standalone operation — no computer or software needed
  • Copies up to 87 USB drives simultaneously
  • Transfer speeds up to 100MB per second
  • Bit-by-bit hardware compare verifies every copy
  • LCD screen with four-key control shows real-time status

Specifikationer

BrandSystor
ModelSYSUSB30100-87
TypeUSB Flash Drive Duplicator
Target1 to 87
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Should I pick the 1-to-87-target model or a smaller duplicator?

Choose the 1-to-87 model when you regularly need to copy to dozens of USB drives at once; its 87 slots let you finish large batches in a single run, while smaller units would require multiple cycles.

What does the 100 MB/s transfer rate mean when I am actually copying drives?

The duplicator can move up to 100 MB each second, so a full 6 GB payload finishes in roughly one minute per target under ideal conditions.

Which USB standards does the duplicator support and what speed ceiling do they impose?

It accepts USB 1.1, 2.0, 3.0 and 3.1 drives; the hardware caps duplication at 100 MB/s regardless of the drive's own rated speed.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.