暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with LCD screen and 63 slots

Systor

Systor SYS-USB30-63 USB 3.0/3.1 Duplicator 1 to 63

SKU CH-JS90-8ZD0K

Standalone USB flash drive duplicator copies one source to 63 targets at up to 300 MB/s with asynchronous operation and bit-by-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 63
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 63

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copy 63 USB drives simultaneously with 1 to 63 target slots
  • Achieve 18 GB per minute throughput at 300 MB per second transfer rate
  • Operate independently with standalone LCD control and no computer needed
  • Duplicate FAT16, FAT32, NTFS and Linux EXT2/3/4 formats via quick copy
  • Verify every bit with bit-by-bit compare for data integrity

High-Capacity USB Duplicator

The Systor SYS-USB30-63 is a standalone duplicator that copies one source USB drive to as many as sixty-three targets simultaneously. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches transfer rates of 300MB/s. An LCD screen and four-button panel let operators select copy or erase modes without a host computer.

Ideal for Volume Production

This unit suits organisations that need to duplicate large batches of flash drives in a single run, such as software distributors, training providers or IT departments deploying standard images. The asynchronous mode allows each slot to load, copy and unload independently so throughput stays high. Buyers who only need to copy a handful of drives at a time or who require interfaces beyond USB should consider a different device.

63-Target Asynchronous Operation

The single specification that determines fit is the sixty-three target ports combined with asynchronous copy mode. If a workflow demands simultaneous duplication to that many USB drives without a PC, this duplicator meets the requirement; if the maximum concurrent target count is lower, a smaller system will be more appropriate.

特長

  • Copy 63 USB drives simultaneously with 1 to 63 target slots
  • Achieve 18 GB per minute throughput at 300 MB per second transfer rate
  • Operate independently with standalone LCD control and no computer needed
  • Duplicate FAT16, FAT32, NTFS and Linux EXT2/3/4 formats via quick copy
  • Verify every bit with bit-by-bit compare for data integrity

仕様

BrandSystor
ModelSYS-USB30-63
TypeUSB Flash Drive Duplicator
Target1 to 63
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What USB standard must my source and target drives support for the duplicator to work?

The duplicator accepts USB 1.1, USB 2.0, USB 3.0 and USB 3.1 flash drives, so any drive matching those standards will work.

Can I copy a USB 2.0 flash drive alongside USB 3.1 drives in the same session?

Yes, the unit supports mixed USB 1.1, 2.0, 3.0 and 3.1 media simultaneously across its 63 target slots.

How do I confirm each copy finished correctly on the LCD screen?

The LCD shows bit-by-bit compare results for every channel, letting you verify successful duplication at up to 300MB/s.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。