Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black standalone USB duplicator with LCD screen and seven target slots

Systor

Systor SYS-USB30-7 1 to 7 USB 3.0/3.1 Duplicator

SKU CH-MFD0-YJM86

Standalone USB duplicator copies one source to seven targets at up to 300 MB/s with bit-by-bit verification

  • TypeUSB Duplicator
  • Target1 to 7
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 07

Vedeți celelalte 7 configurații

Versiunile tăiate există, dar nu sunt disponibile aici.

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Standalone operation requires no host computer
  • Copies up to seven USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-by-bit compare verifies every duplication
  • LCD with four-key control simplifies job setup

Systor SYS-USB30-7 USB Duplicator

The Systor SYS-USB30-7 is a standalone duplicator that copies one source USB drive to up to seven target drives simultaneously. It operates without a host computer and supports USB 1.1, 2.0, 3.0 and 3.1 flash media through its slot-loading ports. A built-in LCD screen and four-button interface provide status feedback in English or Japanese.

Ideal for high-volume USB duplication

This unit suits IT departments, duplication services and manufacturers who need to clone or securely erase batches of USB flash drives at speeds up to 300 MB/s. It is not suited for users who require memory-card slots, internal drive bays or network-connected management. Buyers needing to duplicate optical discs or hard drives should look at dedicated duplicators for those media types.

300 MB/s asynchronous copy with 256 MB buffer

Each of the seven target ports operates independently, allowing asynchronous load, copy and unload cycles without waiting for other slots to finish. The 256 MB buffer sustains the maximum 300 MB/s transfer rate during bit-for-bit duplication and verify operations across FAT16, FAT32, NTFS and Linux file systems.

Puncte forte

  • Standalone operation requires no host computer
  • Copies up to seven USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-by-bit compare verifies every duplication
  • LCD with four-key control simplifies job setup

Specificații

BrandSystor
ModelSYS-USB30-7
TypeUSB Duplicator
Target1 to 7
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What does the 300 MB/s transfer rate mean when the duplicator is running all seven targets?

The 300 MB/s figure is the peak interface speed; actual throughput per port will be lower when all seven targets copy simultaneously because the total bandwidth is shared across channels.

Which USB standards does the duplicator support and what speed ceiling does USB 3.1 impose?

It supports USB 1.1, 2.0, 3.0 and 3.1; USB 3.1 Gen 1 caps the theoretical maximum at 5 Gbps, so real-world copy speeds cannot exceed that limit.

What physical space and power connections does the SYS-USB30-7 need to operate?

The unit has seven front-loading slots for USB drives, a black front panel with an LCD, and an internal power supply that accepts 115 V or 230 V mains.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.