Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black standalone USB duplicator with LCD screen and 31 target slots

Systor

Systor SYS-USB30-31 1 to 31 USB 3.0/3.1 Duplicator

SKU CH-1NMB-ENYVZ

Standalone USB duplicator copies up to 31 drives simultaneously at 300 MB/s with asynchronous operation and LCD control

  • TypeUSB Flash Drive Duplicator
  • Target1 to 31
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 31

Vedeți celelalte 7 configurații

Versiunile tăiate există, dar nu sunt disponibile aici.

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copy up to 31 USB drives simultaneously with 300 MB/s peak speed
  • Duplicate drives without a PC using the built-in LCD interface
  • Achieve 18 GB/min throughput for high-volume production runs
  • Copy FAT16, FAT32, NTFS and Linux file systems bit-for-bit
  • Supports USB 1.1, 2.0, 3.0 and 3.1 drives in one unit

1-to-31 USB 3.1 Duplicator for high-volume copying

The Systor SYS-USB30-31 duplicates up to thirty-one USB flash drives simultaneously without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a data transfer rate of 300 MB/s. The unit operates in standalone mode with an LCD screen and four-key control for language selection in English or Japanese. A 256 MB buffer manages synchronous and asynchronous copy sessions.

Standalone tower with slot-loading bays

The black chassis uses slot-load ports for quick insertion and removal of drives during batch runs. An internal power supply accepts 115 V or 230 V input, so the duplicator can be deployed in different regions without external adapters. Operating humidity tolerance spans 15 % to 90 %, allowing use in typical office or light-industrial environments. No software installation or PC connection is required for any copy or sanitise task.

Replaces manual PC-based copying

Organisations copying large quantities of FAT16, FAT32, NTFS or Linux EXT2/3/4 volumes gain whole-media duplication with bit-by-bit compare verification. The jump is worthwhile when asynchronous operation is needed so each channel loads, unloads and copies independently. Buyers who require network-attached management, logging software or support for proprietary file systems will not find those features here.

Puncte forte

  • Copy up to 31 USB drives simultaneously with 300 MB/s peak speed
  • Duplicate drives without a PC using the built-in LCD interface
  • Achieve 18 GB/min throughput for high-volume production runs
  • Copy FAT16, FAT32, NTFS and Linux file systems bit-for-bit
  • Supports USB 1.1, 2.0, 3.0 and 3.1 drives in one unit

Specificații

BrandSystor
ModelSYS-USB30-31
TypeUSB Flash Drive Duplicator
Target1 to 31
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What USB standard does the SYS-USB30-31 duplicator use, and what practical throughput does it cap at?

It supports USB 1.1, 2.0, 3.0 and 3.1, with a maximum data transfer rate of 300MB/s, which equals up to 18GB per minute during duplication.

What physical space and power does the 31-target unit require to operate?

The standalone tower uses a slot-load design for 31 USB drives and runs on a 115V/230V power supply within 15–90% operating humidity.

How is the duplicator set up, and which step do users often miss?

Connect power, insert the source drive into the first slot and target drives into the remaining slots, select Quick Copy or Whole Media mode via the 4-key LCD menu, then start; the step often missed is confirming the bit-by-bit Compare after the copy finishes.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.