Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black standalone USB duplicator with LCD screen and 31 target slots

Systor

Systor SYS-USB30-31 1 to 31 USB 3.0/3.1 Duplicator

SKU CH-1NMB-ENYVZ

Standalone USB duplicator copies up to 31 drives simultaneously at 300 MB/s with asynchronous operation and LCD control

  • TypeUSB Flash Drive Duplicator
  • Target1 to 31
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 31

Ver as outras 7 configurações

As versões riscadas existem, mas não estão disponíveis aqui.

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copy up to 31 USB drives simultaneously with 300 MB/s peak speed
  • Duplicate drives without a PC using the built-in LCD interface
  • Achieve 18 GB/min throughput for high-volume production runs
  • Copy FAT16, FAT32, NTFS and Linux file systems bit-for-bit
  • Supports USB 1.1, 2.0, 3.0 and 3.1 drives in one unit

1-to-31 USB 3.1 Duplicator for high-volume copying

The Systor SYS-USB30-31 duplicates up to thirty-one USB flash drives simultaneously without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a data transfer rate of 300 MB/s. The unit operates in standalone mode with an LCD screen and four-key control for language selection in English or Japanese. A 256 MB buffer manages synchronous and asynchronous copy sessions.

Standalone tower with slot-loading bays

The black chassis uses slot-load ports for quick insertion and removal of drives during batch runs. An internal power supply accepts 115 V or 230 V input, so the duplicator can be deployed in different regions without external adapters. Operating humidity tolerance spans 15 % to 90 %, allowing use in typical office or light-industrial environments. No software installation or PC connection is required for any copy or sanitise task.

Replaces manual PC-based copying

Organisations copying large quantities of FAT16, FAT32, NTFS or Linux EXT2/3/4 volumes gain whole-media duplication with bit-by-bit compare verification. The jump is worthwhile when asynchronous operation is needed so each channel loads, unloads and copies independently. Buyers who require network-attached management, logging software or support for proprietary file systems will not find those features here.

Pontos fortes

  • Copy up to 31 USB drives simultaneously with 300 MB/s peak speed
  • Duplicate drives without a PC using the built-in LCD interface
  • Achieve 18 GB/min throughput for high-volume production runs
  • Copy FAT16, FAT32, NTFS and Linux file systems bit-for-bit
  • Supports USB 1.1, 2.0, 3.0 and 3.1 drives in one unit

Especificações

BrandSystor
ModelSYS-USB30-31
TypeUSB Flash Drive Duplicator
Target1 to 31
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What USB standard does the SYS-USB30-31 duplicator use, and what practical throughput does it cap at?

It supports USB 1.1, 2.0, 3.0 and 3.1, with a maximum data transfer rate of 300MB/s, which equals up to 18GB per minute during duplication.

What physical space and power does the 31-target unit require to operate?

The standalone tower uses a slot-load design for 31 USB drives and runs on a 115V/230V power supply within 15–90% operating humidity.

How is the duplicator set up, and which step do users often miss?

Connect power, insert the source drive into the first slot and target drives into the remaining slots, select Quick Copy or Whole Media mode via the 4-key LCD menu, then start; the step often missed is confirming the bit-by-bit Compare after the copy finishes.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.