Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black standalone USB duplicator with LCD screen and 31 slots

Systor

Systor SYS-USBD-31 USB Duplicator 1 to 31 targets 33MB/s

SKU CH-FX0V-VYF4M

Standalone USB duplicator copies up to 31 flash drives at 33 MB/s with synchronous and asynchronous modes

  • TypeUSB Flash Drive Duplicator
  • Target1 to 31
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 31

Ver as outras 7 configurações

As versões riscadas existem, mas não estão disponíveis aqui.

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Copies 31 USB drives simultaneously at 33 MB/s
  • Asynchronous mode lets each channel load and copy independently
  • Standalone operation with LCD and four-key control needs no PC
  • Bit-for-bit hardware compare plus DoD-compliant erase verifies and sanitises data
  • Supports USB 1.1, 2.0 and 3.0 drives with FAT16/32, NTFS and Linux file systems

Standalone 31-target USB duplicator

The Systor SYS-USBD-31 copies up to 31 USB flash drives simultaneously without a host computer. It supports USB 1.1, 2.0 and 3.0 media through a SATA connector and 256 MB of buffer memory. Synchronous and asynchronous modes let each channel load, unload and copy independently. The unit runs on 115/230 V, 50/60 Hz power with a 300 W supply.

Sustained duplication throughput

Real-world copy speed reaches 33 MB/s, which translates to roughly 2 GB per minute across all active ports. Asynchronous operation keeps every channel moving even when drives are swapped mid-job, so total job time scales with the slowest individual drive rather than the batch size. Bit-for-bit hardware comparison verifies each copy after the transfer finishes.

Thermals, noise and power draw

The 300 W internal supply handles peak load while the standalone chassis runs quietly in typical office environments. No external cooling or host-system airflow is required. Power consumption stays within the rated 115/230 V input range during continuous multi-drive duplication cycles.

Pontos fortes

  • Copies 31 USB drives simultaneously at 33 MB/s
  • Asynchronous mode lets each channel load and copy independently
  • Standalone operation with LCD and four-key control needs no PC
  • Bit-for-bit hardware compare plus DoD-compliant erase verifies and sanitises data
  • Supports USB 1.1, 2.0 and 3.0 drives with FAT16/32, NTFS and Linux file systems

Especificações

TypeUSB Flash Drive Duplicator
Target1 to 31
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 300 W

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How much power does the 300 W supply draw when all 31 targets are copying at 33 MB/s?

The unit uses a 300 W, 115/230 V, 50/60 Hz power supply; actual draw depends on how many of the 31 ports are active and the drives attached.

What drives or cables must I already have to start duplicating with this unit?

You need USB 1.1, 2.0 or 3.0 flash drives to fill the 31 target slots; no host computer, software or extra cables are required for standalone operation.

Will older USB 1.1 flash drives still copy correctly alongside newer USB 3.0 drives in the same batch?

Yes — the duplicator supports USB 1.1, 2.0 and 3.0 media simultaneously, copying each at its own maximum speed in asynchronous mode.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.