Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black standalone USB duplicator with LCD screen and seven target slots

Systor

Systor SYS-USB30-7 1 to 7 USB 3.0/3.1 Duplicator

SKU CH-MFD0-YJM86

Standalone USB duplicator copies one source to seven targets at up to 300 MB/s with bit-by-bit verification

  • TypeUSB Duplicator
  • Target1 to 7
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 07

Mostra altre 7 configurazioni

Le versioni barrate esistono, ma non sono disponibili qui.

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Standalone operation requires no host computer
  • Copies up to seven USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-by-bit compare verifies every duplication
  • LCD with four-key control simplifies job setup

Systor SYS-USB30-7 USB Duplicator

The Systor SYS-USB30-7 is a standalone duplicator that copies one source USB drive to up to seven target drives simultaneously. It operates without a host computer and supports USB 1.1, 2.0, 3.0 and 3.1 flash media through its slot-loading ports. A built-in LCD screen and four-button interface provide status feedback in English or Japanese.

Ideal for high-volume USB duplication

This unit suits IT departments, duplication services and manufacturers who need to clone or securely erase batches of USB flash drives at speeds up to 300 MB/s. It is not suited for users who require memory-card slots, internal drive bays or network-connected management. Buyers needing to duplicate optical discs or hard drives should look at dedicated duplicators for those media types.

300 MB/s asynchronous copy with 256 MB buffer

Each of the seven target ports operates independently, allowing asynchronous load, copy and unload cycles without waiting for other slots to finish. The 256 MB buffer sustains the maximum 300 MB/s transfer rate during bit-for-bit duplication and verify operations across FAT16, FAT32, NTFS and Linux file systems.

Punti di forza

  • Standalone operation requires no host computer
  • Copies up to seven USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-by-bit compare verifies every duplication
  • LCD with four-key control simplifies job setup

Caratteristiche tecniche

BrandSystor
ModelSYS-USB30-7
TypeUSB Duplicator
Target1 to 7
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What does the 300 MB/s transfer rate mean when the duplicator is running all seven targets?

The 300 MB/s figure is the peak interface speed; actual throughput per port will be lower when all seven targets copy simultaneously because the total bandwidth is shared across channels.

Which USB standards does the duplicator support and what speed ceiling does USB 3.1 impose?

It supports USB 1.1, 2.0, 3.0 and 3.1; USB 3.1 Gen 1 caps the theoretical maximum at 5 Gbps, so real-world copy speeds cannot exceed that limit.

What physical space and power connections does the SYS-USB30-7 need to operate?

The unit has seven front-loading slots for USB drives, a black front panel with an LCD, and an internal power supply that accepts 115 V or 230 V mains.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.