Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Ten red filament spools in a pack, 2.85mm diameter

Taulman 3D

Taulman 3D t-glase Filament 2.85mm Red 10 pack 3D Printers Accessories

SKU CH-2FMX-D4KWF

A 10-spool pack of 2.85 mm PET co-polymer filament formulated for food-safe containers, very low shrinkage on large flat prints, and strength exceeding ABS

  • ColorRed
  • TypeFilament
  • Food-safe polymer approved for direct contact containers
  • Ten spools in one case for high-volume printing
  • Very low shrinkage keeps large flat prints dimensionally accurate
  • Stronger than ABS for durable functional parts
  • Glass-like clarity achievable with optical coatings

Ten-spool pack for high-volume printing

This pack contains ten 1 lb spools of Taulman 3D t-glase filament in red, giving a total of 10 lbs of material. The 2.85 mm diameter suits printers that accept this standard size. The co-polymer is formulated for direct food contact, making it suitable for containers and kitchen items. It is intended for makers who run repeated or large-format jobs and want a consistent supply.

Low shrinkage and industrial strength

The filament exhibits very low shrinkage, which keeps large flat surfaces dimensionally stable during printing. Its tensile strength exceeds that of ABS, a property inherited from Taulman's industrial product line. Optical clarity can approach a glass-like finish when post-processed with appropriate coatings. The material prints reliably on acrylic, glass, Kapton or similar platforms even without a heated bed.

Check printer compatibility and workflow

Verify that your extruder and hot-end accept 2.85 mm filament and can maintain a nozzle temperature between 235 °C and 245 °C. The supplier notes that t-glase prints more slowly than standard PLA or ABS, so it is recommended for intermediate users who can tune speeds and flow rates. Ensure your slicer profile accommodates the material's specific thermal behaviour.

Ciri-ciri utama

  • Food-safe polymer approved for direct contact containers
  • Ten spools in one case for high-volume printing
  • Very low shrinkage keeps large flat prints dimensionally accurate
  • Stronger than ABS for durable functional parts
  • Glass-like clarity achievable with optical coatings

Spesifikasi

ColorRed
TypeFilament

Soalan tentang produk ini

How often will the 2.85mm nozzle need replacing with this filament?

The t-glase PET co-polymer is non-abrasive, so a standard brass nozzle lasts through many 1 lb spools; swap only when extrusion quality drops.

What limits a continuous multi-spool print run first?

Printing at 235-245 °C slows layer speed, so total print time per 1 lb spool becomes the practical limit before the next spool change.

How much heat and power does a 10-spool production run add?

Each spool prints at 235-245 °C with no heated bed required, keeping bed power at zero and hot-end load steady across all ten spools.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.