Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black cylindrical fitting with knurled sides and G 1/4 thread

Thermaltake

Thermaltake CL-W038-CU00BL-A Pacific DIY Cooling 1/2" Fill-Port Fitting G 1/4

SKU CH-RX3T-SDB3X MPN CL-W038-CU00BL-A

A 1/2-inch fill-port fitting with G 1/4 thread for custom liquid-cooling loops

  • TypeFittings
  • FeaturesDimension: ?22 x 26 (H) (mm) Applicable: ID : 1/2”( 13 mm )
  • G 1/4 thread fits standard water-cooling loops
  • 1/2 inch inner diameter suits 13 mm tubing
  • Black chrome plated brass resists corrosion
  • High flow leak free design maintains pressure
  • Compact 22 by 26 mm footprint saves space

Black Chrome Fill-Port Fitting for Custom Loops

The Thermaltake Pacific CL-W038-CU00BL-A is a G 1/4 threaded fill-port fitting machined from copper with a black chrome finish. It accepts 13 mm inner-diameter tubing and provides a dedicated fill point for DIY liquid-cooling builders who want a clean, leak-free reservoir connection.

Low-Profile Brass Construction

At 22 mm wide by 26 mm high and weighing 42 g, the fitting adds minimal restriction to flow while the black chrome plated brass body resists corrosion. The precision threads seal reliably under normal loop pressure without requiring excessive torque, keeping noise and thermal impact negligible.

Stop-to-Tube Design Simplifies Assembly

The integrated stop feature prevents tubing from sliding past the correct insertion depth, reducing the chance of leaks during initial fill and maintenance. No extra clamps or tools are needed beyond standard G 1/4 installation, so builders can complete the loop faster and with fewer potential failure points.

Ciri-ciri utama

  • G 1/4 thread fits standard water-cooling loops
  • 1/2 inch inner diameter suits 13 mm tubing
  • Black chrome plated brass resists corrosion
  • High flow leak free design maintains pressure
  • Compact 22 by 26 mm footprint saves space

Spesifikasi

BrandThermaltake
SeriesPacific
ModelCL-W038-CU00BL-A
TypeFittings
FeaturesDimension: ?22 x 26 (H) (mm)
Applicable: ID : 1/2”( 13 mm )
Weight: 42 g
Material: CU
Screw Thread: G 1/4
Note: Stop to Tube
Berat penghantaran0.07 kg
Dimensi bungkusan58 × 56 × 18 mm

Soalan tentang produk ini

How do I install the G 1/4 fill-port fitting and what step is often missed?

Thread the G 1/4 end into the reservoir port by hand, then tighten with a 22 mm wrench; the step often missed is fully seating the 13 mm inner-diameter tube onto the barbed stop so the O-ring seals.

What maintenance or replacement will this brass fitting need later?

Inspect the black chrome plating and O-ring annually; replace the fitting if corrosion appears or if the seal weeps, otherwise no scheduled replacement is required.

What limit appears first during sustained loop operation?

The 13 mm tube inner diameter sets the maximum flow rate; exceeding the pump’s head pressure at that bore causes turbulence before the fitting itself restricts flow.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.