暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black cylindrical fitting with knurled sides and G 1/4 thread

Thermaltake

Thermaltake CL-W038-CU00BL-A Pacific DIY Cooling 1/2" Fill-Port Fitting G 1/4

SKU CH-RX3T-SDB3X MPN CL-W038-CU00BL-A

A 1/2-inch fill-port fitting with G 1/4 thread for custom liquid-cooling loops

  • TypeFittings
  • FeaturesDimension: ?22 x 26 (H) (mm) Applicable: ID : 1/2”( 13 mm )
  • G 1/4 thread fits standard water-cooling loops
  • 1/2 inch inner diameter suits 13 mm tubing
  • Black chrome plated brass resists corrosion
  • High flow leak free design maintains pressure
  • Compact 22 by 26 mm footprint saves space

Black Chrome Fill-Port Fitting for Custom Loops

The Thermaltake Pacific CL-W038-CU00BL-A is a G 1/4 threaded fill-port fitting machined from copper with a black chrome finish. It accepts 13 mm inner-diameter tubing and provides a dedicated fill point for DIY liquid-cooling builders who want a clean, leak-free reservoir connection.

Low-Profile Brass Construction

At 22 mm wide by 26 mm high and weighing 42 g, the fitting adds minimal restriction to flow while the black chrome plated brass body resists corrosion. The precision threads seal reliably under normal loop pressure without requiring excessive torque, keeping noise and thermal impact negligible.

Stop-to-Tube Design Simplifies Assembly

The integrated stop feature prevents tubing from sliding past the correct insertion depth, reducing the chance of leaks during initial fill and maintenance. No extra clamps or tools are needed beyond standard G 1/4 installation, so builders can complete the loop faster and with fewer potential failure points.

特長

  • G 1/4 thread fits standard water-cooling loops
  • 1/2 inch inner diameter suits 13 mm tubing
  • Black chrome plated brass resists corrosion
  • High flow leak free design maintains pressure
  • Compact 22 by 26 mm footprint saves space

仕様

BrandThermaltake
SeriesPacific
ModelCL-W038-CU00BL-A
TypeFittings
FeaturesDimension: ?22 x 26 (H) (mm)
Applicable: ID : 1/2”( 13 mm )
Weight: 42 g
Material: CU
Screw Thread: G 1/4
Note: Stop to Tube
配送重量0.07 kg
梱包サイズ58 × 56 × 18 mm

この商品に関する質問

How do I install the G 1/4 fill-port fitting and what step is often missed?

Thread the G 1/4 end into the reservoir port by hand, then tighten with a 22 mm wrench; the step often missed is fully seating the 13 mm inner-diameter tube onto the barbed stop so the O-ring seals.

What maintenance or replacement will this brass fitting need later?

Inspect the black chrome plating and O-ring annually; replace the fitting if corrosion appears or if the seal weeps, otherwise no scheduled replacement is required.

What limit appears first during sustained loop operation?

The 13 mm tube inner diameter sets the maximum flow rate; exceeding the pump’s head pressure at that bore causes turbulence before the fitting itself restricts flow.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。