Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green 240-pin DDR3 DIMM with black memory chips, low-profile circuit board

Timetec

Timetec 4GB DDR3 1333MHz PC3-10600 CL9 240-Pin Low Density memory upgrade

SKU CH-MFYZ-42B2P

A 4 GB DDR3 module running at 1333 MHz with CL9 latency and dual 1.5 V or 1.35 V operation for compatible desktop upgrades

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10660)
  • CAS LatencyCL9

Capacity 4GB

  • 4GB capacity expands multitasking headroom for Dell Optiplex 780
  • DDR3 / DDR3L dual-voltage 1.35V / 1.5V fits more systems
  • 1333MHz PC3-10600 CL9 speed meets JEDEC standard
  • 240-pin low-density 2Rx8 design ensures broad compatibility
  • Lifetime warranty with free technical support backs every module

4GB DDR3 1333MHz Desktop Module

This Timetec module is a 4GB DDR3 SDRAM stick built to the PC3-10600 standard at 1333MHz with CL9 latency. It uses a 240-pin UDIMM form factor and operates at either 1.5V or 1.35V. The dual-rank design uses 256x8 chips for broad compatibility with older desktop platforms.

For Dell Optiplex 780 Upgrades

This memory suits owners of a Dell Optiplex 780 DT, MT or SFF who need a single 4GB low-density module. It will not fit laptops or any system that requires SODIMM modules. Builders needing ECC registered memory or capacities above 4GB per slot should look elsewhere.

Dual Voltage 1.35V / 1.5V Operation

The key specification is the dual-voltage rating of 1.35V and 1.5V, allowing the module to run in both DDR3 and DDR3L slots. This flexibility decides whether the part works in a given board. The module also meets JEDEC standards for 1333MHz at CL9.

Ciri-ciri utama

  • 4GB capacity expands multitasking headroom for Dell Optiplex 780
  • DDR3 / DDR3L dual-voltage 1.35V / 1.5V fits more systems
  • 1333MHz PC3-10600 CL9 speed meets JEDEC standard
  • 240-pin low-density 2Rx8 design ensures broad compatibility
  • Lifetime warranty with free technical support backs every module

Spesifikasi

Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10660)
CAS LatencyCL9

Versi lain model ini

1 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How do I install this 240-pin DDR3 module in a Dell Optiplex 780 and what step is often missed?

Power off the PC, open the case, align the notch on the 240-pin edge connector with the DIMM slot key, press firmly until both retention clips click, then verify in BIOS that the module runs at 1333 MHz and 1.35 V or 1.5 V.

What maintenance or replacement will this 4 GB dual-rank kit need over its lifetime?

No scheduled maintenance is required; keep dust off the gold contacts and ensure the CPU cooler maintains safe case temperatures, as the module itself has no moving parts or wear items.

What limit appears first when this CL9 1333 MHz memory runs under sustained heavy load?

The 1333 MT/s data rate and CL9 latency ceiling will bottleneck throughput before the 1.35 V / 1.5 V dual-voltage headroom or thermal envelope becomes a factor.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.