Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green 240-pin DDR3 DIMM with black memory chips, low-profile circuit board

Timetec

Timetec 4GB DDR3 1333MHz PC3-10600 CL9 240-Pin Low Density memory upgrade

SKU CH-MFYZ-42B2P

A 4 GB DDR3 module running at 1333 MHz with CL9 latency and dual 1.5 V or 1.35 V operation for compatible desktop upgrades

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10660)
  • CAS LatencyCL9

Capacity 4GB

  • 4GB capacity expands multitasking headroom for Dell Optiplex 780
  • DDR3 / DDR3L dual-voltage 1.35V / 1.5V fits more systems
  • 1333MHz PC3-10600 CL9 speed meets JEDEC standard
  • 240-pin low-density 2Rx8 design ensures broad compatibility
  • Lifetime warranty with free technical support backs every module

4GB DDR3 1333MHz Desktop Module

This Timetec module is a 4GB DDR3 SDRAM stick built to the PC3-10600 standard at 1333MHz with CL9 latency. It uses a 240-pin UDIMM form factor and operates at either 1.5V or 1.35V. The dual-rank design uses 256x8 chips for broad compatibility with older desktop platforms.

For Dell Optiplex 780 Upgrades

This memory suits owners of a Dell Optiplex 780 DT, MT or SFF who need a single 4GB low-density module. It will not fit laptops or any system that requires SODIMM modules. Builders needing ECC registered memory or capacities above 4GB per slot should look elsewhere.

Dual Voltage 1.35V / 1.5V Operation

The key specification is the dual-voltage rating of 1.35V and 1.5V, allowing the module to run in both DDR3 and DDR3L slots. This flexibility decides whether the part works in a given board. The module also meets JEDEC standards for 1333MHz at CL9.

Fordele

  • 4GB capacity expands multitasking headroom for Dell Optiplex 780
  • DDR3 / DDR3L dual-voltage 1.35V / 1.5V fits more systems
  • 1333MHz PC3-10600 CL9 speed meets JEDEC standard
  • 240-pin low-density 2Rx8 design ensures broad compatibility
  • Lifetime warranty with free technical support backs every module

Specifikationer

Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10660)
CAS LatencyCL9

Andre versioner af denne model

1 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I install this 240-pin DDR3 module in a Dell Optiplex 780 and what step is often missed?

Power off the PC, open the case, align the notch on the 240-pin edge connector with the DIMM slot key, press firmly until both retention clips click, then verify in BIOS that the module runs at 1333 MHz and 1.35 V or 1.5 V.

What maintenance or replacement will this 4 GB dual-rank kit need over its lifetime?

No scheduled maintenance is required; keep dust off the gold contacts and ensure the CPU cooler maintains safe case temperatures, as the module itself has no moving parts or wear items.

What limit appears first when this CL9 1333 MHz memory runs under sustained heavy load?

The 1333 MT/s data rate and CL9 latency ceiling will bottleneck throughput before the 1.35 V / 1.5 V dual-voltage headroom or thermal envelope becomes a factor.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.